14 open source boards using the SY8009AAAC(SOT23-5)
Real designs built with the SY8009AAAC(SOT23-5), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
ICE40HX1K-EVB Rev B
OLIMEX
50 × 50 mm71 parts4LApache-2.0123FPGA
ICE40HX8K-EVB Rev B
OLIMEX
65 × 67 mm97 parts4LApache-2.041FPGA
ICE40-1KEVB Rev A
OLIMEX
50 × 50 mm66 parts2LApache-2.0123FPGA
ICE40HX8K-EVB Rev B1
OLIMEX
65 × 67 mm97 parts4LApache-2.041ESP32
ESP32-GATEWAY Rev B
guydmi
50.8 × 62.2 mm82 parts2LNo license0ESP32
ESP32-GATEWAY Rev A
guydmi
50.8 × 62.2 mm81 parts2LNo license0ESP32
ESP32-GATEWAY Rev B
OLIMEX
50.8 × 62.2 mm82 parts2LApache-2.0320ESP32
ESP32-GATEWAY Rev A
OLIMEX
50.8 × 62.2 mm81 parts2LApache-2.0320ESP32
ESP32-EVB Rev B
OLIMEX
75.2 × 74.7 mm143 parts2LApache-2.0287ESP32
ESP32-EVB Rev B
fso-dev-man
75.2 × 74.7 mm143 parts2LApache-2.00ESP32
ESP32-EVB Rev C
OLIMEX
75.2 × 74.7 mm143 parts2LApache-2.0287ESP32
ESP32-EVB Rev C
fso-dev-man
75.2 × 74.7 mm143 parts2LApache-2.00ESP32
ESP32-EVB Rev A
OLIMEX
75 × 57.2 mm105 parts4LApache-2.0287ESP32
ESP32-EVB Rev A
fso-dev-man
75 × 57.2 mm105 parts4LApache-2.00
How designs wire the SY8009AAAC(SOT23-5)
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SY8009AAAC(SOT23-5) connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a decoupling capacitor on 6 of 6 designs, most often 22 µF (then 47 µF).
- Pin 3 has a inductor on 6 of 6 designs, most often 2.2 µH.
- Pin 4 has a decoupling capacitor on 6 of 6 designs, most often 47 µF (then 22 µF).
- Pin 5 has a resistor to GND on 6 of 6 designs, most often 1.1 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 5V 67% · a signal 33% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: Signal 100% |
|
| Pin 4 | Connected to: 5V 67% · a signal 33% |
|
| Pin 5 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-GATEWAY Rev A by OLIMEX, ESP32-EVB Rev A by OLIMEX, ICE40-1KEVB Rev A by OLIMEX and ICE40HX8K-EVB Rev B by OLIMEX.
The SY8009AAAC(SOT23-5) in open source designs
The gallery holds 14 open source boards using the SY8009AAAC(SOT23-5) from 6 GitHub repositories; a typical one measures about 65 × 62.2 mm and carries around 97 components.
64% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.
The most starred is ESP32-GATEWAY Rev B by OLIMEX.
Parts used alongside the SY8009AAAC(SOT23-5)
What boards using the SY8009AAAC(SOT23-5) are built for
SY8009AAAC(SOT23-5): common questions
Where can I find a SY8009AAAC(SOT23-5) reference design?
Each of the 14 boards on this page is a real design using the SY8009AAAC(SOT23-5). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SY8009AAAC(SOT23-5) pin 1?
Pin 1 has a decoupling capacitor on 6 of 6 designs, most often 22 µF (then 47 µF). Counted from the KiCad layouts of 6 open source designs using the SY8009AAAC(SOT23-5).
How is the SY8009AAAC(SOT23-5) pin 3 connected?
Pin 3 has a inductor on 6 of 6 designs, most often 2.2 µH. Counted from the KiCad layouts of 6 open source designs using the SY8009AAAC(SOT23-5).
What decoupling capacitors do designs use on the SY8009AAAC(SOT23-5) pin 4?
Pin 4 has a decoupling capacitor on 6 of 6 designs, most often 47 µF (then 22 µF). Counted from the KiCad layouts of 6 open source designs using the SY8009AAAC(SOT23-5).
What parts are used alongside the SY8009AAAC(SOT23-5)?
The BAT54C(SOT23-3), BD5230G-TR(SSOP5/SOT-23-5), CH340T(SSOP20W), LAN8710A-EZC(QFN32) and ESP-WROOM-32 appear in the most repositories here.
Which microcontrollers do boards using the SY8009AAAC(SOT23-5) use?
Most are built on ESP32 (10) and FPGA (4).
How big is a typical board using the SY8009AAAC(SOT23-5)?
The median is 65 × 62.2 mm, and 64% are two-layer designs.
What is the most popular open source board using the SY8009AAAC(SOT23-5)?
By GitHub stars, ESP32-GATEWAY Rev B by OLIMEX, with 320 stars.
Can I simulate one of these boards using the SY8009AAAC(SOT23-5) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.