HardLabs

S3-OLinuXino

OLIMEX·S3-OLinuXino·HARDWARE/S3-OLinuXino_Rev_A-release/S3-OLinuXino_Rev_A.kicad_pcb

S3-OLinuXino PCB layout, top view — open source board by OLIMEX

About the S3-OLinuXino PCB

S3-OLinuXino is an open source PCB design by OLIMEX, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 62 × 50 mm, with 217 components from 77 distinct parts.

Other key parts include the AllWinner-S3(FBGA-234), AT24C16C-SSHM-T(SOIC-8_150mil), RTL8723BS(ComboModule), AXP209(QFN-48) and SY8089AAAC(SOT23-5). By type, the board carries 100 capacitors, 63 resistors, 12 inductors, 7 ICs, 4 diodes and 3 LEDs.

It belongs with the displays & leds designs in this gallery.

From the project

IP Camera with S3 SOC from Allwinner, PoE Gigabit, LCD, micro SD, Flash

This board has: - Allwinner S3 Cortex-A7 running at 1.2Ghz - 1Gb DDR3 RAM inside S3 SOC up to 1333Mhz - 100Mb Ethernet interface with PoE option - NAND/eMMC/SPI Flash on socket - WiFi / BT module with RTL8723BS - Audio In and Out - UEXT connector - Configuration EEPROM - LCD connector for LCD-OLinuXino - MIPI camera connector - CSI camera connector - Dimensions: 60 x 50 mm

Main components on the S3-OLinuXino

AllWinner-S3(FBGA-234)AT24C16C-SSHM-T(SOIC-8_150mil)RTL8723BS(ComboModule)AXP209(QFN-48)SY8089AAAC(SOT23-5)SY6280AAC(SOT23-5)MT3608(SOT23-6)

S3-OLinuXino bill of materials (BOM)

217 components, 77 distinct parts.

QtyPartRefs
1
AllWinner-S3(FBGA-234)
U1
1
AT24C16C-SSHM-T(SOIC-8_150mil)
U2
1
RTL8723BS(ComboModule)
U3
1
AXP209(QFN-48)
U4
1
SY8089AAAC(SOT23-5)
U5
1
SY6280AAC(SOT23-5)
U6
1
MT3608(SOT23-6)
U7
1
Q32.768kHz/12.5pF/2P/SMD1206
Q1
1
Q24MHZ/20pF/30ppm/4P/3.2x2.5mm
Q2
1
U.FL-R-SMT-1
ANT1
1
OV2640(FPV-WZB21-24-LF)
CAM1
1
NA(HN2x10)
EXT1
1
IRLML6402(SOT-23)
FET1
1
Flash[2x(PA-V16X-2X10-LF)]
Flash1
2
PJ-W47S-05D2-LF
HEADPHONES/LINEOUT1, MIC/LINEIN1
2
Soldered(1-2);Opened(2-3)
HPHONEOUTL/LINEOUTL1, HPHONEOUTR/LINEOUTR1
1
LPJG0926HENL(MagJack_10_100_1000_with_PoE)
LAN1
1
FPV-WZA21-40-LF
LCD_CON1
2
Opened(2-3);Soldered(1-2)
LINEINL/MICIN1, LINEINR/MICIN1
1
DW02S
LiPo_BAT1
Show 57 more
QtyPartRefs
1
MICRO_SD(TFC-WPAPR-08)
MICRO_SD1
2
IT-1185AU2-160G-G-TR
PWR1, RST1
1
[2x(HN1x2)+HN1x4]
PoE1
3
RA1206_(4x0603)_4B8_100k
RM1, RM2, RM3
1
RA1206_(4X0603)_4B8_51R
RM4
1
1.0mm-pitch_ZIF_SMT-15P
RPi_CAMERA1
1
DTA114YKA(SOT-23)
T1
1
HN2x5
UEXT1
1
MICRO_USB\MISB-SWMM-5B_LF
USB-OTG1
1
LED/YELLOW/0603
CHGLED1
1
LED/Red/0603
GPIO_LED1
1
LED\Red\0603
PWRLED1
1
1N5819(S4SOD-123)
D1
1
SMBJ6.0A
D2
2
1N5822/SS34/SMA
D3, D4
1
3.3nH/+-0.1nH/L0402(LQP15MN3N3B02D)
L1
1
FB0805/600R/2A
L2
3
2.2uH/1.5A/72mR/20%/CD32(SPN30302R2MPTE)
L3, L4, L5
1
2.2uH/4.5A/28mR/20%/CD75/7.8x7.0x5.0mm(YS75-2R2M)
L6
1
2.2uH/1.5A/DCR=72mR/20%/3.00x3.00x1.50mm/CD32(NR3015T2R2M)
L7
5
FB0805\600R\2A
L8, L9, L10, L11, L12
41
100nF/10V/10%/X7R/C0402
C1, C3, C4, C7, C9, C16, C17, C18 +33
20
10uF/6.3V/20%/X5R/C0603
C6, C8, C14, C15, C29, C31, C34, C35 +12
1
10pF/50V/5%/COG/C0402
C10
1
0.8pF/50V/+-0.25pF/COG/C0402
C11
9
47uF/6.3V/20%/X5R/C0805
C12, C25, C26, C27, C56, C58, C61, C69 +1
1
1.5pF/50V/+-0.25pF/COG/C0402
C13
2
2.2uF/6.3V/10%/X5R/C0603
C19, C47
1
1nF/50V/10%/X7R/C0402
C21
1
NA(10uF/6.3V/20%/X5R/C0603)
C23
9
4.7uF/6.3V/20%/X5R/C0603
C24, C28, C37, C43, C44, C45, C46, C48 +1
3
100nF/10V/10%/C0402
C30, C32, C50
1
1uF/10V/20%/X5R/C0603
C42
2
22pF/50V/5%/COG/C0402
C51, C52
6
33pF/50V/5%/COG/C0402
C53, C54, C93, C96, C97, C98
1
1nF/2kV/10%/X7R/C1206
C65
1
NA(15pF/C0402)
C104
20
2.2k/R0402
R1, R2, R3, R4, R5, R6, R14, R15 +12
10
10k/R0402
R7, R11, R26, R32, R37, R39, R46, R48 +2
9
22R/R0402
R8, R9, R12, R20, R22, R54, R55, R62 +1
1
100k/R0402
R10
2
NA
R13, R49
3
200k/1%/R0402
R17, R19, R51
2
240R/1%/R0402
R27, R28
1
6.04k/1%/R0402
R31
1
10M/R0402
R33
2
0R/R0402(Board_Mounted)
R34, R53
1
NA(2.2k/R0402)
R36
1
0.03R/1%/R1206
R38
1
1.1k/1%/R0402
R40
2
3.9k/1%/R0402
R41, R45
1
4.99k/1%/R0402
R42
1
3.32k/1%/R0402
R43
1
8.25k/1%/R0402
R44
1
22R
R50
2
NA/R0402
R56, R64
1
470R/R0402
R57

S3-OLinuXino design files

The KiCad project lives in the OLIMEX/S3-OLinuXino repository on GitHub; these links point at the commit this page was built from.

S3-OLinuXino: common questions

How big is the S3-OLinuXino PCB?

The S3-OLinuXino measures 62 × 50 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the S3-OLinuXino?

217 components, from 77 distinct parts. The full bill of materials is listed on this page.

Where can I download the S3-OLinuXino design files?

From the OLIMEX/S3-OLinuXino repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the S3-OLinuXino design in my own project?

Yes, under the terms of its GPL-3.0 license, which OLIMEX chose for the repository.

Similar boards