89 open source boards using the SY8089AAAC(SOT23-5)

Real designs built with the SY8089AAAC(SOT23-5), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

89 boardsClear filters|Most starred

How designs wire the SY8089AAAC(SOT23-5)

Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the SY8089AAAC(SOT23-5) connects to, and the resistors, capacitors and other passives placed on it.

  • The LX pin has a inductor on 27 of 27 designs, most often 2.2 µH.
  • The IN pin has a capacitor to GND on 27 of 27 designs, most often 22 µF (then 47 µF).
  • The FB pin has a resistor to GND on 27 of 27 designs, most often 49.9 kΩ (then 1.1 kΩ).
  • The EN pin has a capacitor to GND on 26 of 27 designs, most often 22 µF (then 47 µF).
ENpin 1Connected to: Signal 74% · 5V 26%
  • Capacitor to GND on 96% · 22 µF (16), 47 µF (10), 10 µF (4)
GNDpin 2Connected to: GND 100%
LXpin 3Connected to: Signal 100%
  • Inductor on 100% · 2.2 µH (27)
INpin 4Connected to: Signal 74% · 5V 26%
  • Capacitor to GND on 100% · 22 µF (18), 47 µF (13), 10 µF (8)
FBpin 5Connected to: Signal 100%
  • Resistor to GND on 100% · 49.9 kΩ (14), 1.1 kΩ (11), 1.05 kΩ (1)
  • Pull-up to 3.3V on 93% · 220 kΩ (13), 4.99 kΩ (11), 3.32 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-PoE Rev C by OLIMEX, ESP32-GATEWAY Rev C by OLIMEX, ESP32-EVB Rev D by OLIMEX and ESP32-PoE-ISO Rev B by OLIMEX.

The SY8089AAAC(SOT23-5) in open source designs

The gallery holds 89 open source boards using the SY8089AAAC(SOT23-5) from 27 GitHub repositories; a typical one measures about 28 × 74.7 mm and carries around 117 components.

62% are two-layer designs, the rest use four layers or more, and 70% carry an open source license.

The most starred is ESP32-PoE Rev L by OLIMEX.

Microcontrollers on boards using the SY8089AAAC(SOT23-5)

SY8089AAAC(SOT23-5): common questions

Where can I find a SY8089AAAC(SOT23-5) reference design?

Each of the 89 boards on this page is a real design using the SY8089AAAC(SOT23-5). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SY8089AAAC(SOT23-5) LX pin connected?

The LX pin has a inductor on 27 of 27 designs, most often 2.2 µH. Counted from the KiCad layouts of 27 open source designs using the SY8089AAAC(SOT23-5).

How is the SY8089AAAC(SOT23-5) IN pin connected?

The IN pin has a capacitor to GND on 27 of 27 designs, most often 22 µF (then 47 µF). Counted from the KiCad layouts of 27 open source designs using the SY8089AAAC(SOT23-5).

What resistor goes on the SY8089AAAC(SOT23-5) FB pin?

The FB pin has a resistor to GND on 27 of 27 designs, most often 49.9 kΩ (then 1.1 kΩ). Counted from the KiCad layouts of 27 open source designs using the SY8089AAAC(SOT23-5).

What parts are used alongside the SY8089AAAC(SOT23-5)?

The CH340T(SSOP20W), BL4054B-42TPRN(SOT23-5), LAN8710A-EZC(QFN32), ESP-WROOM-32 and BAT54C(SOT23-3) appear in the most repositories here.

Which microcontrollers do boards using the SY8089AAAC(SOT23-5) use?

Most are built on ESP32 (76), RP2040/RP2350 (7) and NXP (1).

How big is a typical board using the SY8089AAAC(SOT23-5)?

The median is 28 × 74.7 mm, and 62% are two-layer designs.

What is the most popular open source board using the SY8089AAAC(SOT23-5)?

By GitHub stars, ESP32-PoE Rev L by OLIMEX, with 407 stars.

Can I simulate one of these boards using the SY8089AAAC(SOT23-5) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part