13 open source boards using the SY6280AAC(SOT23-5)
Real designs built with the SY6280AAC(SOT23-5), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TERES PCB1-A64-MAIN Rev.C
OLIMEX
117 × 89 mm425 parts6LApache-2.0572ESP32
ESP-EVB
OLIMEX
33 × 48.3 mm123 parts2LApache-2.051S3-OLinuXino
OLIMEX
62 × 50 mm217 parts4LGPL-3.041ESP32
ESP32-S2-DevKit-LiPo-USB
OLIMEX
27.9 × 53.3 mm66 parts2LGPL-3.020STM32
STMP1-OLinuXino
OLIMEX
84 × 59.6 mm387 parts8LGPL-3.013IMX8MP-SOM-EVB
OLIMEX
154.6 × 101.8 mm317 parts4LGPL-3.08RK3328-SOM-EBV
OLIMEX
99.1 × 78.7 mm128 parts4LGPL-3.08NXP
RT1010Py
OLIMEX
25.4 × 53.3 mm76 parts4LGPL-3.06STMP1-A13-EVB
OLIMEX
90 × 70 mm138 parts4LGPL-3.03A64-OlinuXino Rev E
Jegeva
90 × 62.5 mm412 parts6LNo license0- schematic only · 463 parts
Kicad pinout gen
code2circuit
463 partsNo license0 TERES PCB1-A64-MAIN Rev.B
OLIMEX
107 × 89 mm409 parts6LApache-2.0572ESP32
ESP-PRO
OLIMEX
33 × 48.3 mm122 parts2LApache-2.051
How designs wire the SY6280AAC(SOT23-5)
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the SY6280AAC(SOT23-5) connects to, and the resistors, capacitors and other passives placed on it.
- Pin 3 has a resistor to GND on 10 of 10 designs, most often 13 kΩ (then 3.9 kΩ).
- Pin 5 has a decoupling capacitor on 10 of 10 designs, most often 47 µF (then 10 µF).
- Pin 1 has a capacitor to GND on 9 of 10 designs, most often 47 µF (then 10 µF).
- Pin 2 is tied to GND on 10 of 10 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 80% · 5V 20% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: Signal 100% |
|
| Pin 4 | Connected to: AXP803(QFN68_8x8mm) 30%, the microcontroller 20%, a connector 20% |
|
| Pin 5 | Connected to: 5V 90% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TERES PCB1-A64-MAIN Rev.B by OLIMEX, ESP-EVB by OLIMEX, S3-OLinuXino by OLIMEX and ESP32-S2-DevKit-LiPo-USB by OLIMEX.
The SY6280AAC(SOT23-5) in open source designs
The gallery holds 13 open source boards using the SY6280AAC(SOT23-5) from 11 GitHub repositories; a typical one measures about 87 × 61.1 mm and carries around 217 components.
75% use four copper layers or more, and 85% carry an open source license.
The most starred is TERES PCB1-A64-MAIN Rev.C by OLIMEX.
Parts used alongside the SY6280AAC(SOT23-5)
What boards using the SY6280AAC(SOT23-5) are built for
SY6280AAC(SOT23-5): common questions
Where can I find a SY6280AAC(SOT23-5) reference design?
Each of the 13 boards on this page is a real design using the SY6280AAC(SOT23-5). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SY6280AAC(SOT23-5) pin 3?
Pin 3 has a resistor to GND on 10 of 10 designs, most often 13 kΩ (then 3.9 kΩ). Counted from the KiCad layouts of 10 open source designs using the SY6280AAC(SOT23-5).
What decoupling capacitors do designs use on the SY6280AAC(SOT23-5) pin 5?
Pin 5 has a decoupling capacitor on 10 of 10 designs, most often 47 µF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the SY6280AAC(SOT23-5).
How is the SY6280AAC(SOT23-5) pin 1 connected?
Pin 1 has a capacitor to GND on 9 of 10 designs, most often 47 µF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the SY6280AAC(SOT23-5).
What parts are used alongside the SY6280AAC(SOT23-5)?
The MT3608(SOT23-6), NA(RCLAMP0524P(SLP2510P8)), AXP803(QFN68_8x8mm), KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)) and SY8089AAAC(SOT23-5) appear in the most repositories here.
Which microcontrollers do boards using the SY6280AAC(SOT23-5) use?
Most are built on ESP32 (3), NXP (1) and STM32 (1).
How big is a typical board using the SY6280AAC(SOT23-5)?
The median is 87 × 61.1 mm, and 25% are two-layer designs.
What is the most popular open source board using the SY6280AAC(SOT23-5)?
By GitHub stars, TERES PCB1-A64-MAIN Rev.C by OLIMEX, with 572 stars.
Can I simulate one of these boards using the SY6280AAC(SOT23-5) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.