17 open source boards using the MT3608(SOT23-6)
Real designs built with the MT3608(SOT23-6), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TERES PCB1-A64-MAIN Rev.C
OLIMEX
117 × 89 mm425 parts6LApache-2.0572RP2040/RP2350
AgonLight2 Rev A
OLIMEX
106.1 × 64.9 mm237 parts4LGPL-3.0105S3-OLinuXino
OLIMEX
62 × 50 mm217 parts4LGPL-3.041ESP32
ESP32-P4-PC Rev B
OLIMEX
60 × 90 mm329 parts4LMIT33ESP32
ESP32-SBC-FabGL Rev A
OLIMEX
104 × 68 mm112 parts2LGPL-3.029RP2040/RP2350
RP2350pc
OLIMEX
85 × 65 mm287 parts4LNo license27ESP32
ESP32-S2-DevKit-LiPo-USB
OLIMEX
27.9 × 53.3 mm66 parts2LGPL-3.020STM32
STMP1-OLinuXino
OLIMEX
84 × 59.6 mm387 parts8LGPL-3.013RP2040/RP2350
RP2040pc
OLIMEX
80 × 65 mm159 parts4LMIT11ESP32
Agon extender
bgates747
60 × 90 mm329 parts4LGPL-3.01A64-OlinuXino Rev E
Jegeva
90 × 62.5 mm412 parts6LNo license0- schematic only · 463 parts
Kicad pinout gen
code2circuit
463 partsNo license0 TERES PCB1-A64-MAIN Rev.B
OLIMEX
107 × 89 mm409 parts6LApache-2.0572RP2040/RP2350
AgonLight2
OLIMEX
106.1 × 64.9 mm237 parts4LGPL-3.0105ESP32
ESP32-P4-PC Rev C
OLIMEX
60 × 90 mm329 parts4LMIT33ESP32
ESP32-SBC-FabGL Rev B
OLIMEX
104 × 68 mm112 parts2LGPL-3.029RISC-V
Neo6502PC-PWR
OLIMEX
46 × 75 mm64 parts2LGPL-3.011
How designs wire the MT3608(SOT23-6)
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the MT3608(SOT23-6) connects to, and the resistors, capacitors and other passives placed on it.
- The LX pin has a inductor on 12 of 12 designs, most often 2.2 µH (then 4.7 µH).
- The FB pin has a resistor to GND on 12 of 12 designs, most often 1.1 kΩ (then 1.05 kΩ).
- The IN pin has a capacitor to GND on 12 of 12 designs, most often 10 µF (then 22 µF).
- The IN pin has a inductor on 12 of 12 designs, most often 2.2 µH (then 4.7 µH).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| LXpin 1 | Connected to: Signal 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| FBpin 3 | Connected to: Signal 100% |
|
| ENpin 4 | Connected to: TPS62A02ADRLR(SOT-563-6) 42% · 3.3V 25% |
|
| INpin 5 | Connected to: TPS62A02ADRLR(SOT-563-6) 42%, AXP803(QFN68_8x8mm) 25%, SY8089AAAC(SOT23-5) 25% |
|
| NCpin 6 | Connected to: Not connected 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TERES PCB1-A64-MAIN Rev.B by OLIMEX, AgonLight2 Rev A by OLIMEX, S3-OLinuXino by OLIMEX and ESP32-P4-PC Rev B by OLIMEX.
The MT3608(SOT23-6) in open source designs
The gallery holds 17 open source boards using the MT3608(SOT23-6) from 13 GitHub repositories; a typical one measures about 84.5 × 66.5 mm and carries around 287 components.
75% use four copper layers or more, and 82% carry an open source license.
The most starred is TERES PCB1-A64-MAIN Rev.C by OLIMEX.
Parts used alongside the MT3608(SOT23-6)
Microcontrollers on boards using the MT3608(SOT23-6)
What boards using the MT3608(SOT23-6) are built for
MT3608(SOT23-6): common questions
Where can I find a MT3608(SOT23-6) reference design?
Each of the 17 boards on this page is a real design using the MT3608(SOT23-6). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MT3608(SOT23-6) LX pin connected?
The LX pin has a inductor on 12 of 12 designs, most often 2.2 µH (then 4.7 µH). Counted from the KiCad layouts of 12 open source designs using the MT3608(SOT23-6).
What resistor goes on the MT3608(SOT23-6) FB pin?
The FB pin has a resistor to GND on 12 of 12 designs, most often 1.1 kΩ (then 1.05 kΩ). Counted from the KiCad layouts of 12 open source designs using the MT3608(SOT23-6).
How is the MT3608(SOT23-6) IN pin connected?
The IN pin has a capacitor to GND on 12 of 12 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 12 open source designs using the MT3608(SOT23-6).
What parts are used alongside the MT3608(SOT23-6)?
The SY6280AAC(SOT23-5), BL4054B-42TPRN(SOT23-5), NA(RCLAMP0524P(SLP2510P8)), TPS62A02ADRLR(SOT-563-6) and AXP803(QFN68_8x8mm) appear in the most repositories here.
Which microcontrollers do boards using the MT3608(SOT23-6) use?
Most are built on ESP32 (6), RP2040/RP2350 (4), RISC-V (1) and STM32 (1).
How big is a typical board using the MT3608(SOT23-6)?
The median is 84.5 × 66.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the MT3608(SOT23-6)?
By GitHub stars, TERES PCB1-A64-MAIN Rev.C by OLIMEX, with 572 stars.
Can I simulate one of these boards using the MT3608(SOT23-6) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.