STM32-USB-I2C-Gyroscope
ollieelliot·STM32-USB-I2C-Gyroscope
About the STM32-USB-I2C-Gyroscope PCB
STM32-USB-I2C-Gyroscope is an open source STM32 PCB design by ollieelliot, published on GitHub under the MIT license. It is a 4-layer board measuring 55 × 54 mm, with 63 components from 41 distinct parts.
Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the MP2359DJ-LF-Z, MPU-6050 and USBLC6-2SC6. By type, the board carries 21 capacitors, 19 resistors, 8 diodes, 4 ICs, 4 connectors and 3 inductors.
It belongs with the sensors designs in this gallery.
From the project
Connecting an STM32F405RG microcontroller with a gyroscope through I2C as well as connecting USB B Micro, SWD and USART in order to learn more about circuit and PCB design.

Main components on the STM32-USB-I2C-Gyroscope
STM32-USB-I2C-Gyroscope bill of materials (BOM)
63 components, 41 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2359DJ-LF-Z | SOT-23-6 | U1 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | STM32F405RGTX STM32F405RGTx | LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | USART_CONN | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J2 |
| 1 | SWD_CONN | PinHeader_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | 12V_CONN | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J4 |
| 1 | 250MA 250mA | Fuse_1206_3216Metric | F1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 2 | B5819W | D_SOD-123 | D1, D2 |
| 1 | C2286 LED_RED | LED_0603_1608Metric | D3 |
| 4 | C72041 BLUE_LED | LED_0603_1608Metric | D4, D5, D6, D7 |
| 1 | C72038 YELLOW_LED | LED_0603_1608Metric | D8 |
| 1 | C1017 600 @ 100Mhz | L_0805_2012Metric | FB1 |
| 1 | 4.7UH 4.7uH | L_Sunlord_MWSA0518_5.4x5.2mm | L1 |
| 1 | 39NH 39nH | L_0402_1005Metric | L2 |
| 3 | 10UF 10uF | C_1206_3216Metric | C1, C3, C20 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10NF 10nF | C_0603_1608Metric | C2, C21 |
| 2 | 10PF 10pF | C_0402_1005Metric | C4, C5 |
| 7 | 100NF 100nF | C_0402_1005Metric | C6, C12, C13, C14, C15, C16, C19 |
| 1 | 100NF 100nF | C_0603_1608Metric | C7 |
| 1 | 2.2NF 2.2nF | C_0603_1608Metric | C8 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C9, C10 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C11 |
| 1 | 1UF 1uF | C_0402_1005Metric | C17 |
| 1 | 10NF 10nF | C_0402_1005Metric | C18 |
| 1 | 120K 120k | R_0603_1608Metric | R1 |
| 1 | 47K 47k | R_0603_1608Metric | R2 |
| 1 | 82K 82k | R_0603_1608Metric | R3 |
| 1 | 15K 15k | R_0603_1608Metric | R4 |
| 1 | 1k | R_0603_1608Metric | R5 |
| 1 | 270 | R_0603_1608Metric | R6 |
| 1 | 10K 10k | R_0402_1005Metric | R7 |
| 4 | 22 | R_0402_1005Metric | R8, R9, R10, R11 |
| 1 | 47 | R_0402_1005Metric | R13 |
| 2 | 2.2K 2.2k | R_0402_1005Metric | R14, R15 |
| 4 | 1.5K 1.5k | R_0402_1005Metric | R16, R17, R18, R19 |
| 1 | 1k | R_0402_1005Metric | R20 |
STM32-USB-I2C-Gyroscope design files
The KiCad project lives in the ollieelliot/STM32-USB-I2C-Gyroscope repository on GitHub; these links point at the commit this page was built from.
STM32-USB-I2C-Gyroscope: common questions
What microcontroller does the STM32-USB-I2C-Gyroscope use?
The STM32-USB-I2C-Gyroscope is built around the STM32F405RGTX, from the STM32 family.
How big is the STM32-USB-I2C-Gyroscope PCB?
The STM32-USB-I2C-Gyroscope measures 55 × 54 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32-USB-I2C-Gyroscope?
63 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32-USB-I2C-Gyroscope design files?
From the ollieelliot/STM32-USB-I2C-Gyroscope repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the STM32-USB-I2C-Gyroscope design in my own project?
Yes, under the terms of its MIT license, which ollieelliot chose for the repository.
Can I test firmware for the STM32-USB-I2C-Gyroscope without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k