ReflowMate
Omar-Magdy0·ReflowMate·HardwareSource/ReflowMate.kicad_pcb
About the ReflowMate PCB
ReflowMate is an open source ESP32 PCB design by Omar-Magdy0, published on GitHub. It is a 2-layer board measuring 98.6 × 98.6 mm, with 70 components from 26 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the XL1509-5.0E1, AMS1117-3.3, MAX31855KASA+T and C2912100. By type, the board carries 30 resistors, 11 diodes, 11 capacitors, 7 transistors, 6 ICs and 2 switches.
From the project
To start small , grow big. current focus is mainly on providing : Digital Soldering iron support Hot air gun support * 3d printable Accessories

Main components on the ReflowMate
ReflowMate bill of materials (BOM)
70 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32D | WIFIM-SMD_39P-L25.5-W18.0-P1.27-BL | U1 |
| 1 | XL1509-5.0E1 | SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2_NOSILKSCREEN | U3 |
| 2 | MAX31855KASA+T | SO-8_L4.9-W3.9-P1.27-LS5.9-BL | U4, U6 |
| 1 | C2912100 EL817S1C(F) | SOP-4_L6.5-W4.6-P2.54-LS10.3-TL | U5 |
| 2 | S9013_C402281 | SOT-23-3_L2.9-W1.3-P0.95-LS2.4-BR | Q1, Q2 |
| 2 | BT136-500 | TO-220-3_Horizontal_TabDown | Q3, Q4 |
| 3 | AO3400_C2938367 | SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | Q5, Q6, Q7 |
| 2 | TSB008A2526A | SW-SMD_L6.0-W3.5-LS8.0 | SW1, SW2 |
| 2 | MOC3020M | DIP-6_L8.5-W6.4-P2.54-LS7.6-BL | T1, T2 |
| 1 | SS34_C8678 | SMA_L4.3-W2.6-LS5.2-RD | D1 |
| 2 | C965822 LED RED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D3 |
| 3 | SD103AW_C181204 | SOD-123_L2.8-W1.8-LS3.7-RD | D4, D6, D8 |
| 4 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D5, D7, D9, D11 |
| 1 | DB107S_C525738 | DBS_L8.4-W6.4-P5.10-LS10.2-BL | D10 |
| 1 | SMMS0650-680M | IND-SMD_L7.1-W6.6_H5.0 | L1 |
| 4 | 1U-50V 1u-50V | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C5, C7 |
| 5 | 100N 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C4, C11, C12, C13 |
| 2 | 10U 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C10 |
| 12 | 10K 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3, R7, R8, R14, R16, R17, R18 +4 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R4, R5, R6, R9, R10 |
| 2 | 360 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R12 |
| 4 | 680 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R15, R19, R27 |
| 2 | C20625284 33k (1W) | R_Axial_DIN0411_L9.9mm_D3.6mm_P7.62mm_Vertical | R22, R23 |
| 2 | 0 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R24, R28 |
| 2 | 4.7K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R29, R30 |
ReflowMate design files
The KiCad project lives in the Omar-Magdy0/ReflowMate repository on GitHub; these links point at the commit this page was built from.
ReflowMate: common questions
What microcontroller does the ReflowMate use?
The ReflowMate is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the ReflowMate PCB?
The ReflowMate measures 98.6 × 98.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ReflowMate?
70 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ReflowMate design files?
From the Omar-Magdy0/ReflowMate repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ReflowMate design in my own project?
The repository has no license, so all rights stay with Omar-Magdy0. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ReflowMate without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k