DTMFDecoder
omaryangtw·DTMFDecoder
About the DTMFDecoder PCB
DTMFDecoder is an open source ESP32 PCB design by omaryangtw, published on GitHub under the MIT license. It is a 2-layer board measuring 57.2 × 58.4 mm, with 32 components from 17 distinct parts.
Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. Other key parts include the SM8223. By type, the board carries 12 resistors, 9 diodes, 7 capacitors, 2 ICs, 1 crystal and 1 connector.
From the project
A DTMF Decoder development kit designed with KiCad
A DTMF Decoder development kit designed with KiCad
This is an implementation of SM8223 Application Circuit and integrated with ESP32 Devkit. Makes it handy to retrieve CID(Caller Identification) and handle through both serial port and HTTP requests.
IO25 : Read DTMF Signals at the baud rate of 1200 IO33 : indicates the signal type (FSK/DTMF)
GBR is included so that it can go through PCB / SMT process directly

Main components on the DTMFDecoder
DTMFDecoder bill of materials (BOM)
32 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SM8223 | DIP-16_W7.62mm | U1 |
| 1 | ESP32-DEVKITC-32D | MODULE_ESP32-DEVKITC-32D | U2 |
| 1 | 3M58 | Crystal_HC49-4H_Vertical | Y1 |
| 1 | 6P6C | RJ12_Amphenol_54601 | J1 |
| 5 | 1N4003 | D_DO-41_SOD81_P7.62mm_Horizontal | D2, D3, D4, D5, D10 |
| 4 | 1N4004 | D_DO-41_SOD81_P7.62mm_Horizontal | D6, D7, D8, D9 |
| 4 | 22nF | C_0603_1608Metric | C1, C2, C3, C4 |
| 2 | 104K | C_0603_1608Metric | C5, C7 |
| 1 | 470nF | C_0603_1608Metric | C6 |
| 2 | 240k | C_0603_1608Metric | R1, R2 |
| 2 | 430k | C_0603_1608Metric | R3, R4 |
| 2 | 34k | C_0603_1608Metric | R5, R6 |
| 2 | 270k | C_0603_1608Metric | R7, R11 |
| 1 | 53.6k | C_0603_1608Metric | R8 |
| 1 | 27k | C_0603_1608Metric | R9 |
| 1 | 60.4k | C_0603_1608Metric | R10 |
| 1 | 464k | C_0603_1608Metric | R12 |
DTMFDecoder design files
The KiCad project lives in the omaryangtw/DTMFDecoder repository on GitHub; these links point at the commit this page was built from.
- Layoutsm8223.kicad_pcb
DTMFDecoder: common questions
What microcontroller does the DTMFDecoder use?
The DTMFDecoder is built around the ESP32-DEVKITC-32D, from the ESP32 family.
How big is the DTMFDecoder PCB?
The DTMFDecoder measures 57.2 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DTMFDecoder?
32 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the DTMFDecoder design files?
From the omaryangtw/DTMFDecoder repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DTMFDecoder design in my own project?
Yes, under the terms of its MIT license, which omaryangtw chose for the repository.
Can I test firmware for the DTMFDecoder without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k