AML Micromouse 24 2

Oopsan204·AML_Micromouse_24_2·AML_MicromousePCB/schematic.kicad_pcb

AML Micromouse 24 2 PCB layout, top view — open source STM32 board by Oopsan204

About the AML Micromouse 24 2 PCB

AML Micromouse 24 2 is an open source STM32 PCB design by Oopsan204, published on GitHub. It is a 2-layer board measuring 65 × 85 mm, with 72 components from 37 distinct parts.

Its main chip is the STM32H743VITx, from the STM32 family. Other key parts include the AMS1117, TB6612FNG_C_8_EL, MP1584 and AMS1117-5.0. By type, the board carries 32 capacitors, 18 resistors, 7 diodes, 5 ICs, 3 connectors and 3 switches.

Main components on the AML Micromouse 24 2

AML Micromouse 24 2 bill of materials (BOM)

72 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32H743VITx
U1
1
AMS1117
U2
1
TB6612FNG_C_8_EL
U3
1
MP1584
U4
1
AMS1117-5.0
U5
1
S8550
Q1
1
Crystal_GND23_Small
Y1
1
Conn_01x04_Socket
J1
1
Conn_01x07_Pin
J5
1
Conn_01x02_Socket
J12
2
SW_Push
SW2, SW3
1
SW_DIP_x05
SW4
1
Conn_01x04_Socket
i2c
1
40V-5A
D1
6
LED
D2, D3, D4, D5, D8, D9
1
22uH
L1
15
100nF
C1, C2, C3, C4, C5, C7, C8, C9 +7
1
4.7uF
C6
1
1uF
C11
2
2.2uF
C12, C13
Show 17 more
QtyPartRefs
1
0.1uF
C15
2
15pF
C16, C17
1
22uF
C18
1
10uF
C19
1
150pF
C21
4
22uF
C23, C24, C30, C31
3
10uF
C25, C26, C32
3
10K
R1, R2, R3
1
210K
R4
1
40.2K
R5
2
100K
R6, R7
1
75k
R8
1
20k
R9
4
1K
R10, R11, R19, R20
2
4.7k
R17, R18
1
1.1R
R21
2
R_Pack05
RN2, RN3

AML Micromouse 24 2 design files

The KiCad project lives in the Oopsan204/AML_Micromouse_24_2 repository on GitHub; these links point at the commit this page was built from.

AML Micromouse 24 2: common questions

What microcontroller does the AML Micromouse 24 2 use?

The AML Micromouse 24 2 is built around the STM32H743VITx, from the STM32 family.

How big is the AML Micromouse 24 2 PCB?

The AML Micromouse 24 2 measures 65 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AML Micromouse 24 2?

72 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AML Micromouse 24 2 design files?

From the Oopsan204/AML_Micromouse_24_2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AML Micromouse 24 2 design in my own project?

The repository has no license, so all rights stay with Oopsan204. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AML Micromouse 24 2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards