Pcb module sgp41

Open-Air-Foundation·pcb-module-sgp41·sgp41-tvoc-sensor-module/sgp41-tvoc-sensor-module.kicad_pcb

Pcb module sgp41 layout, top view — open source board by Open-Air-Foundation

About the Pcb module sgp41

Pcb module sgp41 is an open source PCB design by Open-Air-Foundation, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 10 × 12 mm, with 7 components from 5 distinct parts.

Other key parts include the SGP41-D-R4. By type, the board carries 3 resistors, 2 capacitors, 1 IC and 1 connector.

It belongs with the sensors designs in this gallery.

From the project

A compact 2-layer carrier board for the Sensirion SGP41 TVOC/NOₓ sensor. It exposes the sensor's I²C interface on a 4-pin 2.54 mm header, with on-board pull-ups and decoupling — everything else lives on the host monitor.

A compact 2-layer carrier board for the Sensirion SGP41 TVOC/NOₓ sensor. It exposes the sensor's I²C interface on a 4-pin 2.54 mm header, with on-board pull-ups and decoupling — everything else lives on the host monitor.

A single KiCad project in sgp41-tvoc-sensor-module/: one schematic sheet (sensor, connector, passives) and a 2-layer board. (The design was originally drawn as two separate KiCad 6-era projects — schematic and a board named tvoc-sensor-module — and was unified on import; the archived Gerbers keep the tvoc-sensor-module naming.)

Main components on the Pcb module sgp41

Pcb module sgp41 bill of materials (BOM)

7 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SGP41-D-R4
U1
1
Conn_01x04
J1
2
1uf
C1, C2
1
4.7R
R1
2
10K
R2, R3

Pcb module sgp41 design files

The KiCad project lives in the Open-Air-Foundation/pcb-module-sgp41 repository on GitHub; these links point at the commit this page was built from.

Pcb module sgp41: common questions

How big is the Pcb module sgp41?

The Pcb module sgp41 measures 10 × 12 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb module sgp41?

7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pcb module sgp41 design files?

From the Open-Air-Foundation/pcb-module-sgp41 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pcb module sgp41 design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which Open-Air-Foundation chose for the repository.

Similar boards