Open smartwatch light
Open-Smartwatch·open-smartwatch-light
About the Open smartwatch light PCB
Open smartwatch light is an open source PCB design by Open-Smartwatch, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 36.1 × 36.1 mm, with 51 components from 27 distinct parts.
Other key parts include the DS3231MZ, BMA400, GC9A01_IPS_display, USB-OTG and CH340E. By type, the board carries 17 capacitors, 17 resistors, 10 ICs, 4 switches, 1 transistor and 1 connector.
It belongs with the wearables and rf & radio designs in this gallery.
From the project
Hardware design files. Light version (no GPS, no uSD) of the open-smartwatch
Repo for kicad schematic, board and gerber files. This project is in development and is not ready for release.
To view/modify the files from this repository, install KiCAD from: https://kicad.org
Also, add the following Symbol/Footprint library to KiCAD: https://github.com/Open-Smartwatch/Kicad-Libraries
See: https://htmlpreview.github.io/?https://github.com/Open-Smartwatch/open-smartwatch-light/blob/main/docs/bom/osw-light-ibom.html
Main components on the Open smartwatch light
Open smartwatch light bill of materials (BOM)
51 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS3231MZ | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | BMA400 | LGA-12_2x2mm_P0.5mm | U2 |
| 1 | GC9A01_IPS_display | GC9A01_IPS_display | U4 |
| 1 | USB-OTG | USBmicro-B | U5 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U6 |
| 1 | ttgo-32-micro | ttgo-32-micro | U7 |
| 1 | TPS2115A | TSSOP-8_4.4x3mm_P0.65mm | U9 |
| 2 | XC6209 | SOT-23-5 | U10, U13 |
| 1 | MCP73831T-2ACI_OT | SOT-23-5 | U11 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 4 | SW_Push | button_side_smd | SW1, SW2, SW4, SW5 |
| 1 | LED_Green | LED_0805_2012Metric | D1 |
| 2 | 4.7uF | C_0603_1608Metric | C1, C2 |
| 11 | 0.1u | C_0603_1608Metric | C3, C4, C8, C9, C11, C13, C14, C15 +3 |
| 2 | 100u | C_1206_3216Metric | C5, C6 |
| 2 | 4.7u | C_0603_1608Metric | C16, C17 |
| 1 | 22 | R_0603_1608Metric | R1 |
| 2 | 470R | R_0603_1608Metric | R4, R13 |
| 2 | 1k | R_0603_1608Metric | R6, R7 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 10k | R_0603_1608Metric | R8, R9, R10, R11, R17, R21 |
| 1 | 510R | R_0603_1608Metric | R14 |
| 1 | 5k | R_0603_1608Metric | R15 |
| 1 | 200k | R_0603_1608Metric | R16 |
| 1 | 2.2K | R_0603_1608Metric | R18 |
| 1 | 220k | R_0603_1608Metric | R19 |
| 1 | 1M | R_0603_1608Metric | R22 |
Open smartwatch light design files
The KiCad project lives in the Open-Smartwatch/open-smartwatch-light repository on GitHub; these links point at the commit this page was built from.
Open smartwatch light: common questions
How big is the Open smartwatch light PCB?
The Open smartwatch light measures 36.1 × 36.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Open smartwatch light?
51 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Open smartwatch light design files?
From the Open-Smartwatch/open-smartwatch-light repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Open smartwatch light design in my own project?
Yes, under the terms of its GPL-3.0 license, which Open-Smartwatch chose for the repository.
Similar boards
View screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k