8 open source boards using the TPS2115A
Real designs built with the TPS2115A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Open smartwatch light
Open-Smartwatch
36.1 × 36.1 mm51 parts4LGPL-3.0248Open smartwatch gps
Open-Smartwatch
45 × 41 mm67 parts4LGPL-3.0242NXP
Enye mini versión A
INTI-CMNB
16.8 × 18.4 mm59 parts2LBSD-3-Clause26PiPower v2
wyolum
56 × 56 mm81 parts2LMIT4AVR/Arduino
FCU Mainboard v3
stefanofinetti
270 × 100 mm136 parts2LGPL-3.00NXP
Template
grok-x
16.8 × 18.4 mm59 parts2LNo license0AVR/Arduino
OVHD Mainboard
stefanofinetti
137 × 89 mm123 parts2LGPL-3.05PiPower v2 bak
wyolum
56 × 60 mm77 parts2LMIT4
How designs wire the TPS2115A
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS2115A connects to, and the resistors, capacitors and other passives placed on it.
- Pin 4 has a resistor to GND on 7 of 7 designs, most often 510 Ω (then 1.5 kΩ).
- Pin 5 is tied to GND on 7 of 7 designs.
- Pin 6 is tied to VBUS on 7 of 7 designs.
- Pin 7 is tied to VCC on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Ttgo-32-micro 29% · not connected 29% |
|
| Pin 3 | Connected to: Signal 71% · GND 29% |
|
| Pin 4 | Connected to: Signal 100% |
|
| Pin 5 | Connected to: GND 100% | — |
| Pin 6 | Connected to: VBUS 100% |
|
| Pin 7 | Connected to: VCC 100% | — |
| Pin 8 | Connected to: 5V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open smartwatch light by Open-Smartwatch, Open smartwatch gps by Open-Smartwatch, Enye mini versión A by INTI-CMNB and OVHD Mainboard by stefanofinetti.
The TPS2115A in open source designs
The gallery holds 8 open source boards using the TPS2115A from 7 GitHub repositories; a typical one measures about 50.5 × 48.5 mm and carries around 72 components.
75% are two-layer designs, the rest use four layers or more, and 88% carry an open source license.
The most starred is Open smartwatch light by Open-Smartwatch.
Parts used alongside the TPS2115A
Microcontrollers on boards using the TPS2115A
What boards using the TPS2115A are built for
TPS2115A: common questions
Where can I find a TPS2115A reference design?
Each of the 8 boards on this page is a real design using the TPS2115A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS2115A pin 4?
Pin 4 has a resistor to GND on 7 of 7 designs, most often 510 Ω (then 1.5 kΩ). Counted from the KiCad layouts of 7 open source designs using the TPS2115A.
How is the TPS2115A pin 5 connected?
Pin 5 is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TPS2115A.
How is the TPS2115A pin 6 connected?
Pin 6 is tied to VBUS on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TPS2115A.
What parts are used alongside the TPS2115A?
The MCP73831, AMS1117-3.3, BMA400, CH340E and CH340G appear in the most repositories here.
Which microcontrollers do boards using the TPS2115A use?
Most are built on AVR/Arduino (2) and NXP (2).
How big is a typical board using the TPS2115A?
The median is 50.5 × 48.5 mm, and 75% are two-layer designs.
What is the most popular open source board using the TPS2115A?
By GitHub stars, Open smartwatch light by Open-Smartwatch, with 248 stars.
Can I simulate one of these boards using the TPS2115A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.