BrickInterface

openbrickproject·BrickInterface·kicad/BrickInterface.kicad_pcb

BrickInterface PCB layout, top view — open source WCH CH32/CH55x board by openbrickproject

About the BrickInterface PCB

BrickInterface is an open source WCH CH32/CH55x PCB design by openbrickproject, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 31.8 × 39.8 mm, with 20 components from 16 distinct parts.

Its main chip is the CH552T, from the WCH CH32/CH55x family. By type, the board carries 7 resistors, 4 diodes, 3 capacitors, 2 transistors, 2 connectors and 1 IC.

It belongs with the retro computing designs in this gallery.

From the project

A USB-C interface board for vintage LEGO electronics

BrickInterface is a modern USB-C board that bridges vintage LEGO® electronics where no official solution exists. As of now, it supports the LEGO Interface A and LEGO Power Functions.

The host talks to the board with a framed binary protocol over USB-CDC, and the board appears as a standard serial port.

While this repo contains everything you need to manufacture or build your own BrickInterface, there are a limited number of pre-built boards available:

Main components on the BrickInterface

BrickInterface bill of materials (BOM)

20 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH552T
WCH
U1
2
MMBT2222A
LRC
Q1, Q2
1
TYPE-C-31-M-12
USB_C
Korean Hroparts
J1
1
BH254V-20P
Interface_A
BOOMELE
J2
1
TS3315A
BOOT
XKB Connection
SW1
1
TSAL6200
Vishay
D1
1
TSAL6100
Vishay
D2
1
XL-1608SYGC-06
Green
XINGLIGHT
D4
1
NCD0603Y1
Amber
Honglitronic
D5
2
CC0603KRX7R9BB104
100nF
Yageo
C1, C3
1
CL21A106KAYNNNE
10uF
Samsung
C2
2
FRC0603F5101TS
5.1k
FH
R1, R2
1
RC0603JR-07470RL
470R
Yageo
R3
1
FRC1206F3R30TS
3R3
FH
R4
2
0603WAF1001T5E
1k
Uniroyal
R7, R8
1
RC0603FR-0710KL
10k
Yageo
R9

BrickInterface design files

The KiCad project lives in the openbrickproject/BrickInterface repository on GitHub; these links point at the commit this page was built from.

BrickInterface: common questions

What microcontroller does the BrickInterface use?

The BrickInterface is built around the CH552T, from the WCH CH32/CH55x family.

How big is the BrickInterface PCB?

The BrickInterface measures 31.8 × 39.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the BrickInterface?

20 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BrickInterface design files?

From the openbrickproject/BrickInterface repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BrickInterface design in my own project?

Yes, under the terms of its Apache-2.0 license, which openbrickproject chose for the repository.

Can I test firmware for the BrickInterface without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.

Similar boards