5 open source boards using the EL817S1(C)(TU)-F
Real designs built with the EL817S1(C)(TU)-F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Nixie clock
alx-alexpark
168.8 × 95.8 mm73 parts2LNo license8STM32
Belegt
eurovibes
60 × 145 mm120 parts4LCERN-OHL-S-2.00STM32
Dcclicht
eurovibes
80 × 80 mm101 parts2LCERN-OHL-S-2.00ESP32
Kcell faker
karlp
80 × 60 mm62 parts4LNo license0REG1-App-Dali
OpenKNX
83 × 32.8 mm26 parts2LCC-BY-NC-4.09
How designs wire the EL817S1(C)(TU)-F
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the EL817S1(C)(TU)-F connects to, and the resistors, capacitors and other passives placed on it.
- The AN pin has a series resistor on 4 of 5 designs, most often 330 Ω (then 1 kΩ).
- The EM pin is tied to GND on 4 of 5 designs.
- The COL pin has a pull-up to 3.3V on 3 of 5 designs, most often 1 kΩ (then 4.7 kΩ).
- The CAT pin has a series resistor on 2 of 5 designs, most often 100 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ANpin 1 | Connected to: Signal 100% |
|
| CATpin 2 | Connected to: A connector 40% · GND 40% |
|
| EMpin 3 | Connected to: GND 80% · a signal 20% | — |
| COLpin 4 | Connected to: The microcontroller 40% · VDC 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include REG1-App-Dali by OpenKNX, Nixie clock by alx-alexpark, Belegt by eurovibes and Dcclicht by eurovibes.
The EL817S1(C)(TU)-F in open source designs
The gallery holds 5 open source boards using the EL817S1(C)(TU)-F from 5 GitHub repositories; a typical one measures about 80 × 80 mm and carries around 73 components.
60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is REG1-App-Dali by OpenKNX.
Parts used alongside the EL817S1(C)(TU)-F
Microcontrollers on boards using the EL817S1(C)(TU)-F
What boards using the EL817S1(C)(TU)-F are built for
EL817S1(C)(TU)-F: common questions
Where can I find a EL817S1(C)(TU)-F reference design?
Each of the 5 boards on this page is a real design using the EL817S1(C)(TU)-F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the EL817S1(C)(TU)-F AN pin?
The AN pin has a series resistor on 4 of 5 designs, most often 330 Ω (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the EL817S1(C)(TU)-F.
How is the EL817S1(C)(TU)-F EM pin connected?
The EM pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the EL817S1(C)(TU)-F.
What pull-up resistor is used on the EL817S1(C)(TU)-F COL pin?
The COL pin has a pull-up to 3.3V on 3 of 5 designs, most often 1 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the EL817S1(C)(TU)-F.
What parts are used alongside the EL817S1(C)(TU)-F?
The AMS1117-3.3, ATECC608B-MAVDA-S, CH340N, STM32F103CBT6 and TJA1042T/1J appear in the most repositories here.
Which microcontrollers do boards using the EL817S1(C)(TU)-F use?
Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the EL817S1(C)(TU)-F?
The median is 80 × 80 mm, and 60% are two-layer designs.
What is the most popular open source board using the EL817S1(C)(TU)-F?
By GitHub stars, REG1-App-Dali by OpenKNX, with 9 stars.
Can I simulate one of these boards using the EL817S1(C)(TU)-F before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.