10 open source boards using the LTV-217-B-G
Real designs built with the LTV-217-B-G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
CellKeeper
cellkeeper-bms
260 × 113 mm405 parts4LGPL-3.011RP2040/RP2350
CellKeeper-BMS
clowrey
306 × 113 mm423 parts4LGPL-3.09Main-Board
open-headset-interconnect-standard
100 × 84 mm146 parts2LCC-BY-4.05OpenTherm Click
michpro
25.4 × 57.2 mm47 parts2LCERN-OHL-P-2.05ESP32
BECom
rjsc
63.6 × 86 mm235 parts4LGPL-3.01Main board
mckay27
100 × 103.5 mm66 parts2LNo license0RP2040/RP2350
UP1-GW-UART
OpenKNX
39 × 39 mm59 parts2LNo license5HLW8032 Click
michpro
25.4 × 57.2 mm37 parts2LCERN-OHL-P-2.05REG1-App-GW-RS485
OpenKNX
83 × 32.8 mm33 parts2LCC-BY-NC-4.09RP2040/RP2350
UP1-GW-RS485
OpenKNX
39 × 39 mm52 parts2LNo license5
How designs wire the LTV-217-B-G
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LTV-217-B-G connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a series resistor on 5 of 8 designs, most often 1 kΩ (then 1.8 kΩ).
- Pin 3 has a resistor to GND on 5 of 8 designs, most often 10 kΩ (then 820 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 75% · 5V 25% |
|
| Pin 2 | Connected to: A connector 50% |
|
| Pin 3 | Connected to: A connector 38%, RP2354B 25% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CellKeeper by cellkeeper-bms, CellKeeper-BMS-PCB by clowrey, REG1-App-GW-RS485 by OpenKNX and HLW8032 Click by michpro.
The LTV-217-B-G in open source designs
The gallery holds 10 open source boards using the LTV-217-B-G from 8 GitHub repositories; a typical one measures about 73.3 × 70.6 mm and carries around 63 components.
70% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is CellKeeper by cellkeeper-bms.
Parts used alongside the LTV-217-B-G
Microcontrollers on boards using the LTV-217-B-G
What boards using the LTV-217-B-G are built for
LTV-217-B-G: common questions
Where can I find a LTV-217-B-G reference design?
Each of the 10 boards on this page is a real design using the LTV-217-B-G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LTV-217-B-G pin 1?
Pin 1 has a series resistor on 5 of 8 designs, most often 1 kΩ (then 1.8 kΩ). Counted from the KiCad layouts of 8 open source designs using the LTV-217-B-G.
What resistor goes on the LTV-217-B-G pin 3?
Pin 3 has a resistor to GND on 5 of 8 designs, most often 10 kΩ (then 820 Ω). Counted from the KiCad layouts of 8 open source designs using the LTV-217-B-G.
What parts are used alongside the LTV-217-B-G?
The ADS1115, AM26LV32EIDR, F0505S-1WR3, INA228 and IS2092VW appear in the most repositories here.
Which microcontrollers do boards using the LTV-217-B-G use?
Most are built on RP2040/RP2350 (4) and ESP32 (1).
How big is a typical board using the LTV-217-B-G?
The median is 73.3 × 70.6 mm, and 70% are two-layer designs.
What is the most popular open source board using the LTV-217-B-G?
By GitHub stars, CellKeeper by cellkeeper-bms, with 11 stars.
Can I simulate one of these boards using the LTV-217-B-G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.