Milling coupon
opensimgear·device-template·electronics/boards/starter/0.1.0/home-milling/coupon/milling-coupon.kicad_pcb
About the Milling coupon PCB
Milling coupon is an open source STM32 PCB design by opensimgear, published on GitHub under the Custom license license. It is a 2-layer board measuring 45 × 35 mm, with 30 components from 7 distinct parts.
Its main chip is the STM32G0B1CBT6, from the STM32 family. Other key parts include the USBLC6-2SC6. By type, the board carries 2 ICs and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.
This project is heavily under development and is not ready for use. Use it entirely at your own risk. To the fullest extent permitted by applicable law, the authors and contributors disclaim all liability for any damage, loss, or other issues arising from its use.
This 45 × 35 mm coupon tests whether the proposed home PCB milling process can reproduce the device-template's smallest features. It is an unpowered geometry and hand-assembly test, not a working USB circuit, a device PCB, or an impedance test. No milling toolpaths, machine settings, Gerbers or fabrication order have been created.
Main components on the Milling coupon
Milling coupon bill of materials (BOM)
30 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G0B1CBT6 LQFP48 milling fit test | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 LM66100DCKR milling fit test | TI_DCK0006A_SC70-6_LM66100 | U2 |
| 1 | USB4105-GF-A USB4105-GF-A milling fit test | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 24 | probe end | BACK_END_L0, BACK_END_L1, BACK_END_R0, BACK_END_R1, QFP_END_1, QFP_END_2, QFP_END_3, QFP_END_4 +16 | |
| 1 | gap 0.20 | G1 | |
| 1 | gap 0.25 | G2 | |
| 1 | gap 0.30 | G3 |
Milling coupon design files
The KiCad project lives in the opensimgear/device-template repository on GitHub; these links point at the commit this page was built from.
Milling coupon: common questions
What microcontroller does the Milling coupon use?
The Milling coupon is built around the STM32G0B1CBT6, from the STM32 family.
How big is the Milling coupon PCB?
The Milling coupon measures 45 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Milling coupon?
30 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Milling coupon design files?
From the opensimgear/device-template repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Milling coupon design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Milling coupon without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in device-template
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k