OpenSimGear generic STM32G0B1 module

opensimgear·device-template·electronics/boards/starter/0.1.0/starter.kicad_pcb

OpenSimGear generic STM32G0B1 module layout, top view — open source STM32 board by opensimgear

About the OpenSimGear generic STM32G0B1 module

OpenSimGear generic STM32G0B1 module is an open source STM32 PCB design by opensimgear, published on GitHub under the Custom license license. It is a 4-layer board measuring 85 × 75 mm, with 107 components from 39 distinct parts.

Its main chip is the STM32G0B1CBT6, from the STM32 family. Other key parts include the USBLC6-2SC6, TCAN3413D, R-78E5.0-0.5, TLV75533PDBVR and LM66100DCKR. By type, the board carries 57 resistors, 20 capacitors, 18 connectors, 7 ICs, 3 diodes and 1 fuse.

It belongs with the displays & leds designs in this gallery.

From the project

Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.

This project is heavily under development and is not ready for use. Use it entirely at your own risk. To the fullest extent permitted by applicable law, the authors and contributors disclaim all liability for any damage, loss, or other issues arising from its use.

Open starter.kicadpro in KiCad 10. The current design provides eight analogue inputs, 24 digital lines and I²C for optional 16-input expansion boards. Firmware profiles assign those resources to the controls each device needs; unused controls are omitted from its USB HID descriptor. The matching board target is starterg0b1cbv010`.…

Main components on the OpenSimGear generic STM32G0B1 module

OpenSimGear generic STM32G0B1 module bill of materials (BOM)

107 components, 39 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G0B1CBT6
U1
1
USBLC6-2SC6
U2
1
TCAN3413D
U3
1
R-78E5.0-0.5
U4
1
TLV75533PDBVR
U5
2
LM66100DCKR
U6, U7
1
USB4105-GF-A
USB-C DEVICE
J1
2
5301-4P4C
4P4C POWERED CAN
J2, J3
1
TSW-105-07-L-S
SWD / 3V3 REFERENCE ONLY
J4
1
TSW-103-07-L-S
AXIS A0 / 3.3V
J5
1
TSW-103-07-L-S
CAN TEST / END TERMINATION
J6
1
TSW-103-07-L-S
AXIS A1 / 3.3V
J7
1
TSW-103-07-L-S
AXIS A2 / 3.3V
J8
1
TSW-103-07-L-S
AXIS A3 / 3.3V
J9
1
TSW-103-07-L-S
AXIS A4 / 3.3V
J10
1
TSW-103-07-L-S
AXIS A5 / 3.3V
J11
1
TSW-103-07-L-S
AXIS A6 / 3.3V
J12
1
TSW-103-07-L-S
AXIS A7 / 3.3V
J13
1
TSW-107-07-L-S
DIGITAL D0–D5
J14
1
TSW-107-07-L-S
DIGITAL D6–D11
J15
Show 19 more
QtyPartRefs
1
TSW-107-07-L-S
DIGITAL D12–D17
J16
1
TSW-107-07-L-S
DIGITAL D18–D23
J17
1
TSW-104-07-L-S
LOCAL 3.3V I2C EXPANSION
J18
1
1206L025/24YR
0.25A hold / 24V
F1
1
B3F-1002-G
RESET
SW2
1
SS14-E3/61T
SS14
D1
1
AP2012SGC
GREEN
D4
1
SMF15A-E3-08
D5
15
C0805C104K3RACTU
100nF 25V X7R
C1, C6, C8, C9, C10, C11, C12, C13 +7
1
GRM32ER71H106KA12L
10uF 50V X7R
C2
3
C2012X7R1E105K125AB
1uF 25V X7R
C3, C4, C7
1
C2012X7R1E225K125AB
2.2uF 25V X7R
C5
2
RC0805FR-075K1L
5.1k 1%
R1, R2
1
RC0805FR-0710KL
10k 1%
R3
1
RC0805FR-0715KL
15k 1%
R4
26
RC0805FR-0710KL
10k
R5, R7, R43, R44, R45, R46, R47, R48 +18
9
RC0805FR-071KL
1k
R8, R19, R22, R25, R28, R31, R34, R37 +1
16
RC0805FR-071ML
1M
R20, R21, R23, R24, R26, R27, R29, R30 +8
2
RC0805FR-074K7L
4.7k
R67, R68

OpenSimGear generic STM32G0B1 module design files

The KiCad project lives in the opensimgear/device-template repository on GitHub; these links point at the commit this page was built from.

OpenSimGear generic STM32G0B1 module: common questions

What microcontroller does the OpenSimGear generic STM32G0B1 module use?

The OpenSimGear generic STM32G0B1 module is built around the STM32G0B1CBT6, from the STM32 family.

How big is the OpenSimGear generic STM32G0B1 module?

The OpenSimGear generic STM32G0B1 module measures 85 × 75 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the OpenSimGear generic STM32G0B1 module?

107 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the OpenSimGear generic STM32G0B1 module design files?

From the opensimgear/device-template repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the OpenSimGear generic STM32G0B1 module design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the OpenSimGear generic STM32G0B1 module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in device-template

Similar boards