As5047p breakout rev2
About the As5047p breakout rev2
As5047p breakout rev2 is an open source PCB design by oresat, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 40 × 39.5 mm, with 8 components from 6 distinct parts.
Other key parts include the MAX892LEUA+ and MA730. By type, the board carries 4 capacitors, 2 ICs and 1 connector.
It belongs with the sensors, rf & radio and dev boards & breakouts designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers
For more information on the OreSat project, please see !
This repo contains the following projects:
The OreSat ADCS Card ADCS M0 microcontroller on its own OreSat Power Domain (OPD) Power switch and LTC4300 that connects the M0 to: BMI088 IMU (onboard the ADCS card) LTC4305 2-Channel I2C Bus Multiplexer (one on each end cap via the backplane, end cards, and connectors to the end caps) Two MMC5883MA magnetometers (two on each end cap, multiplexed by the LTC4305s) Three STSPIN250s for the X, Y, and Z magnetorquers Q1 Reaction Wheel OPD which powers the Q1 RW board Q2 Reaction Wheel OPD which…
Main components on the As5047p breakout rev2
As5047p breakout rev2 bill of materials (BOM)
8 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX892LEUA+ AS5047P | TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | MA730 | QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm | U2 |
| 1 | Conn_01x08 | PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | MountingHole_Pad | board-def-rev7.3 | H1 |
| 2 | CC0603KRX7R7BB105 100n | C_0603_1608Metric | C1, C4 |
| 2 | CC0603KRX7R7BB105 4.7u | C_0603_1608Metric | C2, C3 |
As5047p breakout rev2 design files
The KiCad project lives in the oresat/oresat-adcs-hardware repository on GitHub; these links point at the commit this page was built from.
As5047p breakout rev2: common questions
How big is the As5047p breakout rev2?
The As5047p breakout rev2 measures 40 × 39.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the As5047p breakout rev2?
8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the As5047p breakout rev2 design files?
From the oresat/oresat-adcs-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the As5047p breakout rev2 design in my own project?
Yes, under the terms of its GPL-2.0 license, which oresat chose for the repository.
More boards in oresat-adcs-hardware
STM32Oresat adcs card
99.8 × 94.6 mm579 parts4LGPL-2.019
Rev6.0 flat powerstage
100 × 100 mm263 parts4LGPL-2.019
OreSat Reaction Wheel Card
99.8 × 94.6 mm258 parts4LGPL-2.019
MCXN Reaction Wheel Board
35 × 50 mm210 parts6LGPL-2.019
STM32Controller rev5.0 flat
100 × 100 mm198 parts4LGPL-2.019
OreSat Mag Card
99.8 × 94.6 mm175 parts4LGPL-2.019
STM32Rev6.0 flat controlstage
57.6 × 80.1 mm134 parts4LGPL-2.019
STM32Control stage
40 × 36.5 mm78 parts6LGPL-2.019
Earlier revisions in the repo: as5047p_breakout
Similar boards
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675