7 open source boards using the MMC5883MA
Real designs built with the MMC5883MA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32SimpleFC G
wangyeee
42 × 50 mm130 parts4LBSD-3-Clause9
ESP32WifiWallSwitch
Uspizig
65.4 × 68 mm141 parts2LGPL-3.04
STM32SimpleFCv2
42 × 50 mm119 parts4LBSD-3-Clause9
Slimenrfauxaux
SlimeVR
27 × 12 mm10 parts2LNo license30
OreSat0 +Z End Cap
oresat
105.6 × 105.6 mm41 parts2LNo license5
Oresat0.5-plusz end cap
105.6 × 105.6 mm35 parts2LNo license5
Oresat0.5-minusz end cap
105.6 × 105.6 mm27 parts2LNo license5
The MMC5883MA in open source designs
The gallery holds 7 open source boards using the MMC5883MA from 4 GitHub repositories; a typical one measures about 65.4 × 68 mm and carries around 41 components.
71% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Slimenrfauxaux by SlimeVR.
What boards using the MMC5883MA are built for
MMC5883MA: common questions
Where can I find a MMC5883MA reference design?
Each of the 7 boards on this page is a real design using the MMC5883MA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MMC5883MA use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the MMC5883MA?
The median is 65.4 × 68 mm, and 71% are two-layer designs.
What is the most popular open source board using the MMC5883MA?
By GitHub stars, Slimenrfauxaux by SlimeVR, with 30 stars.
Can I simulate one of these boards using the MMC5883MA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.