A3P250 Dev Board
oresat·oresat-gps-hardware·MicroSemi_FPGA_Dev_Board/kicad_board_design/A3P250_Dev_Board/A3P250_Dev_Board.kicad_pcb
About the A3P250 Dev Board
A3P250 Dev Board is an open source PCB design by oresat, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 46 × 46 mm, with 49 components from 24 distinct parts.
Other key parts include the A3P250, LTC3561A and LT1962-3.3. By type, the board carries 29 capacitors, 8 resistors, 4 connectors, 3 ICs, 2 diodes and 2 inductors.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
Hardware for OreSat's SDR GPS receive and other SDR GPS projects
This is the repo for our OreSat GPS Card. For software, see the oresat-gps-software repo.
A SkyTraq Orion-B16 GNSS module, a GNSS receiver module meant for university CubeSat use. An Analog Devices MAX2771 SDR GNSS receiver IC that is read by the Octavo OSD335x-SM processor's PRU and then parsed using the GNSS-SDR project software.
TRL 6-7 ish. Flown, but not yet demonstrated to work in space.
Main components on the A3P250 Dev Board
A3P250 Dev Board bill of materials (BOM)
49 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A3P250 | LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | LTC3561A | DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm | U2 |
| 1 | LT1962-3.3 | MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | ASE-25MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 4 | Conn_01x20 | PinHeader_1x20_P2.00mm_Vertical | J1, J2, J3, J4 |
| 1 | LED_ALT | LED_0805_2012Metric | D1 |
| 1 | LED_ALT | LED_0603_1608Metric | D2 |
| 1 | 2.2uH | L_Wuerth_MAPI-2512 | L1 |
| 1 | 6.8uH | L_1206_3216Metric | L2 |
| 3 | 0.01uF | C_0603_1608Metric | C1, C3, C7 |
| 1 | 0.33uF | C_0603_1608Metric | C2 |
| 1 | 680pF | C_0603_1608Metric | C4 |
| 1 | 1uF | C_0603_1608Metric | C5 |
| 1 | 22uF | C_1210_3225Metric | C6 |
| 3 | 10uF | C_0603_1608Metric | C8, C10, C11 |
| 1 | 22pF | C_0603_1608Metric | C9 |
| 9 | .1uF | C_0402_1005Metric | C12, C14, C16, C18, C20, C22, C24, C26 +1 |
| 9 | 0.01uF | C_0402_1005Metric | C13, C15, C17, C19, C21, C23, C25, C27 +1 |
| 2 | 200 | R_0805_2012Metric | R1, R6 |
| 1 | 16.9K | R_0603_1608Metric | R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 549K | R_0603_1608Metric | R3 |
| 1 | 287K | R_0603_1608Metric | R4 |
| 1 | 249K | R_0603_1608Metric | R5 |
| 2 | 20K | R_0603_1608Metric | R7, R8 |
A3P250 Dev Board design files
The KiCad project lives in the oresat/oresat-gps-hardware repository on GitHub; these links point at the commit this page was built from.
A3P250 Dev Board: common questions
How big is the A3P250 Dev Board?
The A3P250 Dev Board measures 46 × 46 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the A3P250 Dev Board?
49 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the A3P250 Dev Board design files?
From the oresat/oresat-gps-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the A3P250 Dev Board design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which oresat chose for the repository.
More boards in oresat-gps-hardware
OreSat GPS Card
oresat
99.8 × 94.6 mm210 parts4LCERN-OHL-S-2.034Usb gps
oresat
99.1 × 53.3 mm86 parts4LCERN-OHL-S-2.0341.5V switcher test
oresat
46.7 × 46.7 mm39 parts4LCERN-OHL-S-2.034Switcher
oresat
22.5 × 18 mm12 parts4LCERN-OHL-S-2.034Switcher close
oresat
22.5 × 18 mm12 parts4LCERN-OHL-S-2.034BaseBoard
oresat
83.3 × 64 mm7 parts2LCERN-OHL-S-2.034
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979