ModuleDriver
About the ModuleDriver PCB
ModuleDriver is an open source PCB design by orgTestCodacy11KRepos110MB, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 100 × 100 mm, with 59 components from 44 distinct parts.
Other key parts include the Mega2560Shield, SSD1306_I2C, ULN2003A_L, ULN2003A_K and ULN2003A_J. By type, the board carries 19 ICs, 16 capacitors, 12 diodes, 8 connectors, 3 resistors and 1 jumper.
It belongs with the wearables and displays & leds designs in this gallery.
From the project
This is a DIY split-flap display. Prototype four-character display: video.
This is a DIY split-flap display. Prototype four-character display: video.
The goal is to make a low-cost display that's easy to fabricate at home in small/single quantities (e.g. custom materials can be ordered from Ponoko or similar, and other hardware is generally available).
You can view an interactive 3d model of the design on the project website.
The splitflap community Discord server is the best place to keep up with the latest changes or ask questions about the project!
Main components on the ModuleDriver
ModuleDriver bill of materials (BOM)
59 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Mega2560Shield | Mega2560Shield_Modified | U1 |
| 1 | SSD1306_I2C | SSD1306_128x32 | U2 |
| 1 | ULN2003A_L | ULN2003AModule_No_EN_No_FSilk | U3 |
| 1 | ULN2003A_K | ULN2003AModule_No_EN_No_FSilk | U4 |
| 1 | ULN2003A_J | ULN2003AModule_No_EN_No_FSilk | U5 |
| 1 | ULN2003A_I | ULN2003AModule_No_EN_No_FSilk | U6 |
| 1 | ULN2003A_H | ULN2003AModule_No_EN_No_FSilk | U7 |
| 1 | ULN2003A_G | ULN2003AModule_No_EN_No_FSilk | U8 |
| 1 | ULN2003A_F | ULN2003AModule_No_EN_No_FSilk | U9 |
| 1 | ULN2003A_E | ULN2003AModule_No_EN_No_FSilk | U10 |
| 1 | INA219 Breakout Wide (blue) | INA219_LARGE | U11 |
| 1 | ULN2003A_D | ULN2003AModule_No_EN_No_FSilk | U12 |
| 1 | ULN2003A_C | ULN2003AModule_No_EN_No_FSilk | U13 |
| 1 | ULN2003A_B | ULN2003AModule_No_EN_No_FSilk | U14 |
| 1 | ULN2003A_A | ULN2003AModule_No_EN_No_FSilk | U15 |
| 1 | RS485Module | RS485Module | U17 |
| 1 | INA219 Breakout Narrow (purple) | INA219_SMALL | U31 |
| 1 | SP485 | SOIC-8_3.9x4.9mm_P1.27mm | U32 |
| 1 | INA219BxD | SOIC-8_3.9x4.9mm_P1.27mm | U33 |
| 1 | Power In | TerminalBlock_bornier-3_P5.08mm | J1 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UART | TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | SENSOR | PinHeader_1x12_P2.54mm_Vertical | J3 |
| 1 | 5V | PinHeader_1x12_P2.54mm_Vertical | J4 |
| 1 | GND | PinHeader_1x12_P2.54mm_Vertical | J5 |
| 2 | RS485 | TerminalBlock_bornier-2_P5.08mm | J8, J9 |
| 1 | 12V SENSE | TerminalBlock_bornier-2_P5.08mm | J10 |
| 1 | 12V_VIN | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | SK6812_A | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | SK6812_B | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 1 | SK6812_C | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D3 |
| 1 | SK6812_D | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D4 |
| 1 | SK6812_E | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D5 |
| 1 | SK6812_F | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D6 |
| 1 | SK6812_G | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D7 |
| 1 | SK6812_H | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D8 |
| 1 | SK6812_I | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D9 |
| 1 | SK6812_J | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D10 |
| 1 | SK6812_K | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D11 |
| 1 | SK6812_L | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D12 |
| 14 | 0.1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C5, C6, C7, C8, C9, C10 +6 |
| 1 | 100uF | CP_Radial_D10.0mm_P3.50mm | C3 |
| 1 | 10uF | CP_Radial_D6.3mm_P2.50mm | C4 |
| 2 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R17, R18 |
| 1 | 0.1R 1% 1/2 W | R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R19 |
ModuleDriver design files
The KiCad project lives in the orgTestCodacy11KRepos110MB/repo-1066-splitflap repository on GitHub; these links point at the commit this page was built from.
ModuleDriver: common questions
How big is the ModuleDriver PCB?
The ModuleDriver measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ModuleDriver?
59 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the ModuleDriver design files?
From the orgTestCodacy11KRepos110MB/repo-1066-splitflap repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ModuleDriver design in my own project?
Yes, under the terms of its Apache-2.0 license, which orgTestCodacy11KRepos110MB chose for the repository.
More boards in repo-1066-splitflap
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.00
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.00
ChainlinkDriver
198.1 × 30.5 mm58 parts2LApache-2.00
AVR/ArduinoSplitflap controller board
96 × 48 mm33 parts2LApache-2.00
ChainlinkBuddyTDisplay
74.9 × 49.5 mm8 parts2LApache-2.00
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
Display eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k