3 open source boards using the SSD1306_I2C
Real designs built with the SSD1306_I2C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Pico dev
execuc
99.1 × 76.2 mm41 parts2LCustom license182
ModuleDriver
nintando64
100 × 100 mm59 parts2LApache-2.00
ModuleDriver
orgTestCodacy11KRepos110MB
100 × 100 mm59 parts2LApache-2.00
The SSD1306_I2C in open source designs
The gallery holds 3 open source boards using the SSD1306_I2C from 3 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 59 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Pico dev by execuc.
Parts used alongside the SSD1306_I2C
Microcontrollers on boards using the SSD1306_I2C
What boards using the SSD1306_I2C are built for
SSD1306_I2C: common questions
Where can I find a SSD1306_I2C reference design?
Each of the 3 boards on this page is a real design using the SSD1306_I2C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SSD1306_I2C?
The INA219 Breakout Narrow (purple), INA219 Breakout Wide (blue), INA219BxD, Mega2560Shield and RS485Module appear in the most repositories here.
Which microcontrollers do boards using the SSD1306_I2C use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the SSD1306_I2C?
The median is 100 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the SSD1306_I2C?
By GitHub stars, Pico dev by execuc, with 182 stars.
Can I simulate one of these boards using the SSD1306_I2C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.