Compassv1
orri93·electronics·circuits/compassv1/compassv1.kicad_pcb
About the Compassv1 PCB
Compassv1 is an open source STM32 PCB design by orri93, published on GitHub under the MIT license. It is a 2-layer board measuring 56.6 × 57.7 mm, with 3 components from 3 distinct parts.
Its main chip is the STM32C031K6Tx, from the STM32 family. Other key parts include the LIS3MDL. By type, the board carries 2 ICs and 1 resistor.
From the project
Electronics Projects
A personal collection of electronics projects, experiments, and reusable design assets.
This repository includes circuit designs (mostly KiCad), component libraries, simulation files, prototypes, firmware/code, and supporting documentation. It is organized as a working archive where each project can include one or more of the following:
- Hardware design files (schematics and PCB layouts) - Build/manufacturing outputs (for example gerbers) - Notes, references, and datasheets - Source code or firmware when the project includes programmable parts
Main components on the Compassv1
Compassv1 bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32C031K6Tx | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | LIS3MDL | LGA-12_2x2mm_P0.5mm | U2 |
| 1 | R | R1 |
Compassv1 design files
The KiCad project lives in the orri93/electronics repository on GitHub; these links point at the commit this page was built from.
Compassv1: common questions
What microcontroller does the Compassv1 use?
The Compassv1 is built around the STM32C031K6Tx, from the STM32 family.
How big is the Compassv1 PCB?
The Compassv1 measures 56.6 × 57.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Compassv1?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Compassv1 design files?
From the orri93/electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Compassv1 design in my own project?
Yes, under the terms of its MIT license, which orri93 chose for the repository.
Can I test firmware for the Compassv1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in electronics
ESP32
Worldclockv1
orri93
193.8 × 120 mm116 parts2LMIT1Four7segwithshiftreg
orri93
85.3 × 39.4 mm41 parts2LMIT1Mjk14v1
orri93
56.6 × 57.7 mm33 parts2LMIT1Rpiampdacv1
orri93
65 × 56.5 mm28 parts2LMIT1Ardampdacv1
orri93
68.6 × 53.3 mm26 parts2LMIT1Singletramtransv1
orri93
56.6 × 57.7 mm21 parts2LMIT1ESP32
Esp32htv1
orri93
56.6 × 57.7 mm20 parts2LMIT1Signalforamtransv1
orri93
56.6 × 57.7 mm20 parts2LMIT1Cmos4017with555v2
orri93
59.2 × 24.4 mm18 parts2LMIT1CMOS4017with555timerPanel
orri93
148.8 × 126.2 mm18 parts2LMIT1Lm386audampv2
orri93
47.2 × 33.3 mm14 parts2LMIT1
Earlier revisions in the repo: compassv0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k