Mjk14v1
orri93·electronics·circuits/mjk14v1/mjk14v1.kicad_pcb
About the Mjk14v1 PCB
Mjk14v1 is an open source PCB design by orri93, published on GitHub under the MIT license. It is a 2-layer board measuring 56.6 × 57.7 mm, with 33 components from 22 distinct parts.
Other key parts include the 4093, 4029 and BAW56LT1G. By type, the board carries 7 diodes, 7 resistors, 4 ICs, 4 transistors, 4 connectors and 4 test points.
From the project
Electronics Projects
A personal collection of electronics projects, experiments, and reusable design assets.
This repository includes circuit designs (mostly KiCad), component libraries, simulation files, prototypes, firmware/code, and supporting documentation. It is organized as a working archive where each project can include one or more of the following:
- Hardware design files (schematics and PCB layouts) - Build/manufacturing outputs (for example gerbers) - Notes, references, and datasheets - Source code or firmware when the project includes programmable parts
Main components on the Mjk14v1
Mjk14v1 bill of materials (BOM)
33 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4093 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | 4029 | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 2 | BAW56LT1G | SOT-23-3 | U3, U4 |
| 3 | MMBT100 | SOT-23-3 | Q1, Q2, Q3 |
| 1 | BC857 | SOT-23 | Q4 |
| 1 | 9VDC | Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J1 |
| 1 | GND | Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J2 |
| 1 | Touch | Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J3 |
| 1 | Touch GND | Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J4 |
| 1 | GND | TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | CK | TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 1 | T1 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP3 |
| 1 | T2 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP4 |
| 7 | LED | LED_D5.0mm | D4, D5, D6, D7, D8, D9, D10 |
| 1 | 1uF/63V | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | C1 |
| 1 | 6.8uF/25V | CP_Elec_4x5.8 | C3 |
| 1 | 220uF/16V | CP_Elec_6.3x7.7 | C4 |
| 3 | 270 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3 |
| 1 | 330 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 6.8k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 1M | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
Mjk14v1 design files
The KiCad project lives in the orri93/electronics repository on GitHub; these links point at the commit this page was built from.
Mjk14v1: common questions
How big is the Mjk14v1 PCB?
The Mjk14v1 measures 56.6 × 57.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mjk14v1?
33 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mjk14v1 design files?
From the orri93/electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mjk14v1 design in my own project?
Yes, under the terms of its MIT license, which orri93 chose for the repository.
More boards in electronics
ESP32
Worldclockv1
orri93
193.8 × 120 mm116 parts2LMIT1Four7segwithshiftreg
orri93
85.3 × 39.4 mm41 parts2LMIT1Rpiampdacv1
orri93
65 × 56.5 mm28 parts2LMIT1Ardampdacv1
orri93
68.6 × 53.3 mm26 parts2LMIT1Singletramtransv1
orri93
56.6 × 57.7 mm21 parts2LMIT1Signalforamtransv1
orri93
56.6 × 57.7 mm20 parts2LMIT1ESP32
Esp32htv1
orri93
56.6 × 57.7 mm20 parts2LMIT1Cmos4017with555v2
orri93
59.2 × 24.4 mm18 parts2LMIT1CMOS4017with555timerPanel
orri93
148.8 × 126.2 mm18 parts2LMIT1Lm386audampv2
orri93
47.2 × 33.3 mm14 parts2LMIT1STM32
Compassv1
orri93
56.6 × 57.7 mm3 parts2LMIT1