19 open source boards using the LIS3MDL

Real designs built with the LIS3MDL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the LIS3MDL

Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the LIS3MDL connects to, and the resistors, capacitors and other passives placed on it.

  • The C1 pin has a capacitor to GND on 15 of 16 designs, most often 100 nF (then 1 µF).
  • The VDD pin has a decoupling capacitor on 14 of 16 designs, most often 100 nF (then 1 µF).
  • The VDD_IO pin has a decoupling capacitor on 14 of 16 designs, most often 100 nF (then 1 µF).
  • The SCL/SPC pin has a pull-up to 3.3V on 7 of 16 designs, most often 10 kΩ (then 5.1 kΩ).
SCL/SPCpin 1Connected to: The microcontroller 44%, a connector 25%
  • Pull-up to 3.3V on 44% · 10 kΩ (3), 5.1 kΩ (2), 4.7 kΩ (1)
GNDpin 2, 3, 12Connected to: GND 100%
C1pin 4Connected to: Signal 94%
  • Capacitor to GND on 94% · 100 nF (17), 1 µF (2)
VDDpin 5Connected to: 3.3V 88%
  • Decoupling capacitor on 88% · 100 nF (27), 1 µF (10), 4.7 µF (4)
VDD_IOpin 6Connected to: 3.3V 94%
  • Decoupling capacitor on 88% · 100 nF (26), 1 µF (9), 4.7 µF (4)
SDA/SDI/SDOpin 11Connected to: The microcontroller 40%, a connector 27%
  • Pull-up to 3.3V on 47% · 10 kΩ (3), 5.1 kΩ (2), 4.7 kΩ (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MIDAS MK1 by ISSUIUC, LIS3MDL + LSM6DS3 rev A by HydroVinci-PULV, Mainboard v13 by TIGERs-Mannheim and Earth-Field-NMR by fmarrabal.

The LIS3MDL in open source designs

The gallery holds 19 open source boards using the LIS3MDL from 17 GitHub repositories; a typical one measures about 51.8 × 85 mm and carries around 114 components.

68% use four copper layers or more, and 37% carry an open source license.

The most starred is MIDAS MK1 by ISSUIUC.

Microcontrollers on boards using the LIS3MDL

LIS3MDL: common questions

Where can I find a LIS3MDL reference design?

Each of the 19 boards on this page is a real design using the LIS3MDL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LIS3MDL C1 pin connected?

The C1 pin has a capacitor to GND on 15 of 16 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 16 open source designs using the LIS3MDL.

What decoupling capacitors do designs use on the LIS3MDL VDD pin?

The VDD pin has a decoupling capacitor on 14 of 16 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 16 open source designs using the LIS3MDL.

What decoupling capacitors do designs use on the LIS3MDL VDD_IO pin?

The VDD_IO pin has a decoupling capacitor on 14 of 16 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 16 open source designs using the LIS3MDL.

What parts are used alongside the LIS3MDL?

The AMS1117-3.3, BMP388, ICM-42688-P, LP5907MFX-3.3 and LSM6DS3 appear in the most repositories here.

Which microcontrollers do boards using the LIS3MDL use?

Most are built on STM32 (7), ESP32 (6), RP2040/RP2350 (3) and NXP (1).

How big is a typical board using the LIS3MDL?

The median is 51.8 × 85 mm, and 32% are two-layer designs.

What is the most popular open source board using the LIS3MDL?

By GitHub stars, MIDAS MK1 by ISSUIUC, with 31 stars.

Can I simulate one of these boards using the LIS3MDL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part