Rpiampdacv1
About the Rpiampdacv1 PCB
Rpiampdacv1 is an open source PCB design by orri93, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 56.5 mm, with 28 components from 18 distinct parts.
Other key parts include the CAT24C256, MCP4725xxx-xCH and LM358. By type, the board carries 10 resistors, 4 jumpers, 4 test points, 4 capacitors, 3 ICs and 3 connectors.
From the project
Electronics Projects
A personal collection of electronics projects, experiments, and reusable design assets.
This repository includes circuit designs (mostly KiCad), component libraries, simulation files, prototypes, firmware/code, and supporting documentation. It is organized as a working archive where each project can include one or more of the following:
- Hardware design files (schematics and PCB layouts) - Build/manufacturing outputs (for example gerbers) - Notes, references, and datasheets - Source code or firmware when the project includes programmable parts
Main components on the Rpiampdacv1
Rpiampdacv1 bill of materials (BOM)
28 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CAT24C256 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MCP4725xxx-xCH | SOT-23-6 | U2 |
| 1 | LM358 | CERDIP-8_W7.62mm_SideBrazed_LongPads_Socket | U3 |
| 1 | GPIO | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Power | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | 132203RP | COAX4GND_132203RP_AMP | J3 |
| 4 | ID_WP | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 1 | Analog | TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | SCL | TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 2 | SDA | TestPoint_Loop_D2.50mm_Drill1.0mm | TP3, TP4 |
| 2 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 0.1uF | CP_Radial_D5.0mm_P2.00mm | C3, C4 |
| 4 | 3.9k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4 |
| 2 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R7 |
| 1 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 12k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 1k | TRIM_3352T-1-102LF | R9 |
| 1 | 47k | TRIM_3352T-1-102LF | R10 |
Rpiampdacv1 design files
The KiCad project lives in the orri93/electronics repository on GitHub; these links point at the commit this page was built from.
Rpiampdacv1: common questions
How big is the Rpiampdacv1 PCB?
The Rpiampdacv1 measures 65 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rpiampdacv1?
28 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rpiampdacv1 design files?
From the orri93/electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rpiampdacv1 design in my own project?
Yes, under the terms of its MIT license, which orri93 chose for the repository.
More boards in electronics
ESP32Worldclockv1
193.8 × 120 mm116 parts2LMIT1
Four7segwithshiftreg
85.3 × 39.4 mm41 parts2LMIT1
Enter Title On Page Setting Dialog
56.6 × 57.7 mm33 parts2LMIT1
Ardampdacv1
68.6 × 53.3 mm26 parts2LMIT1
Enter Title On Page Setting Dialog
56.6 × 57.7 mm21 parts2LMIT1
ESP32Enter Title On Page Setting Dialog
56.6 × 57.7 mm20 parts2LMIT1
Enter Title On Page Setting Dialog
56.6 × 57.7 mm20 parts2LMIT1
CMOS4017with555timerPanel
148.8 × 126.2 mm18 parts2LMIT1
Cmos4017with555v2
59.2 × 24.4 mm18 parts2LMIT1
Lm386audampv2
47.2 × 33.3 mm14 parts2LMIT1
STM32Enter Title On Page Setting Dialog
56.6 × 57.7 mm3 parts2LMIT1