Esp32htv1

orri93·electronics·circuits/esp32htv1/esp32htv1.kicad_pcb

Esp32htv1 PCB layout, top view — open source ESP32 board by orri93

About the Esp32htv1 PCB

Esp32htv1 is an open source ESP32 PCB design by orri93, published on GitHub under the MIT license. It is a 2-layer board measuring 56.6 × 57.7 mm, with 20 components from 14 distinct parts.

Its main chip is the ESP32-WROOM-32UE, from the ESP32 family. Other key parts include the BME280 and LD1117S33TR_SOT223. By type, the board carries 10 capacitors, 4 ICs, 2 connectors, 2 switches and 2 resistors.

From the project

Electronics Projects

A personal collection of electronics projects, experiments, and reusable design assets.

This repository includes circuit designs (mostly KiCad), component libraries, simulation files, prototypes, firmware/code, and supporting documentation. It is organized as a working archive where each project can include one or more of the following:

- Hardware design files (schematics and PCB layouts) - Build/manufacturing outputs (for example gerbers) - Notes, references, and datasheets - Source code or firmware when the project includes programmable parts

Main components on the Esp32htv1

Esp32htv1 bill of materials (BOM)

20 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BME280
U1
1
ESP32-WROOM-32UE
U2
1
LD1117S33TR_SOT223
U3
1
~
U4
1
Power
J1
1
UART
J2
1
SW_Push
SW1
1
BOOT
SW2
1
.1 uF
C1
1
22 uF
C2
4
100 nF
C3, C4, C6, C7
4
1 uF
C5, C8, C9, C10
1
10k
R1
1
10
R2

Esp32htv1 design files

The KiCad project lives in the orri93/electronics repository on GitHub; these links point at the commit this page was built from.

Esp32htv1: common questions

What microcontroller does the Esp32htv1 use?

The Esp32htv1 is built around the ESP32-WROOM-32UE, from the ESP32 family.

How big is the Esp32htv1 PCB?

The Esp32htv1 measures 56.6 × 57.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32htv1?

20 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32htv1 design files?

From the orri93/electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32htv1 design in my own project?

Yes, under the terms of its MIT license, which orri93 chose for the repository.

Can I test firmware for the Esp32htv1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in electronics

Earlier revisions in the repo: esp32htv0

Similar boards