HardLabs

Intel 10M02SCE144 Breakout Board

Otter-IO·GPS-Synchronized-Clock·Intel_10M02SCE144_Breakout_Board/Intel_10M02SCE144_Breakout_Board.kicad_pcb

Intel 10M02SCE144 Breakout Board layout, top view — open source FPGA board by Otter-IO

About the Intel 10M02SCE144 Breakout Board

Intel 10M02SCE144 Breakout Board is an open source FPGA PCB design by Otter-IO, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 82.6 × 53.3 mm, with 61 components from 20 distinct parts.

Its main chip is the 10M02SCE144C8G, from the FPGA family. By type, the board carries 30 capacitors, 15 resistors, 6 connectors, 6 diodes, 1 IC and 1 crystal.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

From the project

FPGA Based GPS Synchronized Clock

The clock is split into 2 pieces, the FPGA board and the clock display. This was done so that to FPGA board could be used for other projects easily without redesign. It also allowed me to use a 4-layer board for the FPGA and a 2-layer board for the clock display. This helped keep costs low while also getting the advantages of a 4-layer board for the FPGA. The boards were designed using KiCAD.

Main components on the Intel 10M02SCE144 Breakout Board

10M02SCE144C8G

Intel 10M02SCE144 Breakout Board bill of materials (BOM)

61 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
10M02SCE144C8G
U1
1
Crystal_Oscillator
Y1
1
USB_B_Mini
J1
1
5V POWER
J2
2
Conn_02x20_Odd_Even
J3, J5
1
Conn_02x14_Odd_Even
J4
1
JTAG
J6
1
3.3V LDO Regulator
PS1
1
RESET
S1
1
POWER
D1
1
LED
D2
4
D_Schottky
D3, D4, D5, D6
2
10uF
C1, C2
1
0.01uF
C3
15
0.1uF
C4, C5, C6, C7, C8, C9, C10, C11 +7
8
1uF
C12, C14, C16, C18, C20, C22, C24, C26
4
10pF
C27, C28, C29, C30
2
220
R1, R15
1
220
1k
R2
12
220
10k
R3, R4, R5, R6, R7, R8, R9, R10 +4

Intel 10M02SCE144 Breakout Board design files

The KiCad project lives in the Otter-IO/GPS-Synchronized-Clock repository on GitHub; these links point at the commit this page was built from.

Intel 10M02SCE144 Breakout Board: common questions

What microcontroller does the Intel 10M02SCE144 Breakout Board use?

The Intel 10M02SCE144 Breakout Board is built around the 10M02SCE144C8G, from the FPGA family.

How big is the Intel 10M02SCE144 Breakout Board?

The Intel 10M02SCE144 Breakout Board measures 82.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Intel 10M02SCE144 Breakout Board?

61 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Intel 10M02SCE144 Breakout Board design files?

From the Otter-IO/GPS-Synchronized-Clock repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Intel 10M02SCE144 Breakout Board design in my own project?

Yes, under the terms of its GPL-3.0 license, which Otter-IO chose for the repository.

Can I test firmware for the Intel 10M02SCE144 Breakout Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in GPS-Synchronized-Clock

Similar boards