HardLabs

COCHE COMPETENCIA

OttoDotto·Robot-de-Competencia·Pcb Kicad/COCHE_COMPETENCIA.kicad_pcb

COCHE COMPETENCIA PCB layout, top view — open source AVR/Arduino board by OttoDotto

About the COCHE COMPETENCIA PCB

COCHE COMPETENCIA is an open source AVR/Arduino PCB design by OttoDotto, published on GitHub. It is a 2-layer board measuring 75 × 65 mm, with 13 components from 11 distinct parts.

Its main chip is the ARDUINO_NANO, from the AVR/Arduino family. Other key parts include the DRV8833. By type, the board carries 4 connectors, 3 capacitors, 2 ICs, 2 switches, 1 battery holder and 1 diode.

It belongs with the robotics & motion and iot & wireless designs in this gallery.

From the project

Robot Futbol y Carrera (Seguidor de Linea) para competencia de robotica

Este repositorio contiene el diseño y desarrollo de un robot móvil autónomo basado en ESP32, pensado para competencias de seguidores de línea y adaptable a otras categorías (sumo o fútbol robótico).

Main components on the COCHE COMPETENCIA

DRV8833ARDUINO_NANO

COCHE COMPETENCIA bill of materials (BOM)

13 components, 11 distinct parts.

QtyPartRefs
1
DRV8833
U1
1
ARDUINO_NANO
U2
1
BAT
J1
1
SENSORES
J3
1
M1
J5
1
M2
J6
1
2S 70C 250mAH
BT1
1
ON/OFF
SW1
1
SW_RUN
SW2
1
D_Schottky
D1
3
100n
C1, C2, C3

COCHE COMPETENCIA design files

The KiCad project lives in the OttoDotto/Robot-de-Competencia repository on GitHub; these links point at the commit this page was built from.

COCHE COMPETENCIA: common questions

What microcontroller does the COCHE COMPETENCIA use?

The COCHE COMPETENCIA is built around the ARDUINO_NANO, from the AVR/Arduino family.

How big is the COCHE COMPETENCIA PCB?

The COCHE COMPETENCIA measures 75 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the COCHE COMPETENCIA?

13 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the COCHE COMPETENCIA design files?

From the OttoDotto/Robot-de-Competencia repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the COCHE COMPETENCIA design in my own project?

The repository has no license, so all rights stay with OttoDotto. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the COCHE COMPETENCIA without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Robot-de-Competencia

Similar boards