Distortion-Pedal
Outdatedcandy92·Distortion-Pedal·PCB/kicad/Guitar-Distortion.kicad_pcb
About the Distortion-Pedal PCB
Distortion-Pedal is an open source PCB design by Outdatedcandy92, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 45 × 60 mm, with 53 components from 28 distinct parts.
Other key parts include the NJM4558. By type, the board carries 24 resistors, 15 capacitors, 4 diodes, 3 transistors, 3 connectors and 1 IC.
It belongs with the audio designs in this gallery.
From the project
A tiny distortion pedal PCB designed to be embedded inside a guitar. The board uses 1206 and THT components making it easily moddable; in addition it also includes pin sockets for transistors and op amp making it easy to swap out and try different components for different sounds!
A tiny distortion pedal PCB designed to be embedded inside a guitar. The board uses 1206 and THT components making it easily moddable; in addition it also includes pin sockets for transistors and op amp making it easy to swap out and try different components for different sounds!
Schematics pdf is available under the /PCB folder and the project's KiCad files can be found under /PCB/kicad.
Main components on the Distortion-Pedal
Distortion-Pedal bill of materials (BOM)
53 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NJM4558 | DIP-8_W7.62mm_Socket | U1 |
| 3 | 2SC2240 | PinSocket_1x03_P2.54mm_Vertical | Q1, Q2, Q3 |
| 3 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J2, J3 |
| 2 | 100KB | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | RV1, RV3 |
| 1 | 20KB | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | RV2 |
| 1 | 1N4004 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 3 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D4 |
| 1 | 100UF 100uF | CP_Elec_6.3x7.7 | C1 |
| 1 | 47UF 47uF | CP_Elec_6.3x7.7 | C2 |
| 3 | 47NF 47nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C3, C5, C14 |
| 3 | 470NF 470nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C4, C9, C10 |
| 1 | 250PF 250pF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C6 |
| 1 | 68NF 68nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C7 |
| 1 | 100PF 100pF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C8 |
| 1 | 10NF 10nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C11 |
| 1 | 22NF 22nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C12 |
| 1 | 100NF 100nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C13 |
| 1 | 1UF 1uF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C15 |
| 7 | 10K | R_1206_3216Metric | R1, R2, R5, R6, R9, R19, R22 |
| 2 | 1K | R_1206_3216Metric | R3, R23 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 470K | R_1206_3216Metric | R4, R8 |
| 4 | 100K | R_1206_3216Metric | R7, R11, R13, R24 |
| 1 | 22R | R_1206_3216Metric | R10 |
| 1 | 47K | R_1206_3216Metric | R12 |
| 1 | 4.7K | R_1206_3216Metric | R14 |
| 3 | 2.2K | R_1206_3216Metric | R15, R16, R17 |
| 1 | 6.8K | R_1206_3216Metric | R18 |
| 2 | 1M | R_1206_3216Metric | R20, R21 |
Distortion-Pedal design files
The KiCad project lives in the Outdatedcandy92/Distortion-Pedal repository on GitHub; these links point at the commit this page was built from.
Distortion-Pedal: common questions
How big is the Distortion-Pedal PCB?
The Distortion-Pedal measures 45 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Distortion-Pedal?
53 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Distortion-Pedal design files?
From the Outdatedcandy92/Distortion-Pedal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Distortion-Pedal design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which Outdatedcandy92 chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687