DistortionPedal
Outdatedcandy92·DistortionPedal·src/kicad/Distortion.kicad_pcb
About the DistortionPedal PCB
DistortionPedal is an open source PCB design by Outdatedcandy92, published on GitHub. It is a 2-layer board measuring 50.4 × 48.4 mm, with 56 components from 35 distinct parts.
Other key parts include the NJM4558. By type, the board carries 24 resistors, 15 capacitors, 4 diodes, 3 transistors and 1 IC.
It belongs with the audio designs in this gallery.
From the project
An affordable DIY DS-1 clone
This project is a custom-built clone of the iconic BOSS DS-1 Distortion Pedal, one of the most well-known and widely used distortion pedals in guitar history.
You can order the pcb using the gerbers inside /src/fab
Go to build instructions to find out how to assemble one

Main components on the DistortionPedal
DistortionPedal bill of materials (BOM)
56 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NJM4558 | SIP-8_19x3mm_P2.54mm | U1 |
| 3 | 2SC2240 | TO-92_Inline | Q1, Q2, Q3 |
| 1 | AudioInput_SLEEVE | TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | IN_SLEEVE1 |
| 1 | IN_TIP | TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | IN_TIP1 |
| 1 | AudioOutput_SLEEVE | TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | OUT_SLEEVE1 |
| 1 | OUT_TIP | TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | OUT_TIP1 |
| 1 | PWR+ | TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | PWR+2 |
| 1 | PWR- | TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | PWR-1 |
| 1 | 100KB DIST | POT | VR1 |
| 1 | 100KB LEVEL | POT | VR2 |
| 1 | 20KB TONE | POT | VR3 |
| 1 | 1N4004 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 3 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D4, D5, D8 |
| 2 | 47NF 47nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C3 |
| 1 | 0.47U 0.47u | CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 250PF 250pF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C4 |
| 1 | 68NF 68nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
| 1 | 100PF 100pF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C7 |
| 2 | 0.47UF 0.47uF | CP_Radial_D5.0mm_P2.50mm | C8, C9 |
| 1 | 0.01UF 0.01uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C10 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.022UF 0.022uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C11 |
| 1 | 0.1UF 0.1uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C12 |
| 1 | 0.047UF 0.047uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C13 |
| 2 | 100UF 100uF | CP_Radial_D5.0mm_P2.50mm | C14, C23 |
| 1 | 47UF 47uF | CP_Radial_D5.0mm_P2.50mm | C15 |
| 2 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R22 |
| 2 | 470K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R7 |
| 7 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R8, R10, R18, R21, R24, R25 |
| 4 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R11, R23 |
| 1 | 22 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 4.7K 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 2 | 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14, R15 |
| 2 | 6.8K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16, R17 |
| 2 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R19, R20 |
| 1 | 47K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R39 |
DistortionPedal design files
The KiCad project lives in the Outdatedcandy92/DistortionPedal repository on GitHub; these links point at the commit this page was built from.
DistortionPedal: common questions
How big is the DistortionPedal PCB?
The DistortionPedal measures 50.4 × 48.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DistortionPedal?
56 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DistortionPedal design files?
From the Outdatedcandy92/DistortionPedal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DistortionPedal design in my own project?
The repository has no license, so all rights stay with Outdatedcandy92. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687