Robocar racer controller-2025
PabloNunees·robocar-racer-controller-2025
About the Robocar racer controller-2025 PCB
Robocar racer controller-2025 is an open source ESP32 PCB design by PabloNunees, published on GitHub under the MIT license. It is a 2-layer board measuring 97 × 73.8 mm, with 23 components from 8 distinct parts.
Its main chip is the ESP 38 PINOS, from the ESP32 family. Other key parts include the PC817. By type, the board carries 12 resistors, 4 ICs, 4 LEDs and 2 connectors.
From the project
Placa controladora baseada em ESP32 para veículo autônomo em escala (Robocar Racer 2025). Desenvolvida pela equipe Laser, o sistema interpreta comandos da Raspberry Pi para gerenciar a tração e direção do veículo, integrando isolamento galvânico e redundância via rádio.

Main components on the Robocar racer controller-2025
Robocar racer controller-2025 bill of materials (BOM)
23 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | PC817 | DIP-4_W7.62mm | U1, U2, U3, U4 |
| 1 | GY-87 | Barramento 8 pinos reto | J1 |
| 1 | Barramento 16 pinos | Barramento 16 pinos | J2 |
| 1 | ~ | ESP 38 PINOS | ESP_WROOM_32U1 |
| 4 | Led_3mm | LED3MM | LED1, LED2, LED3, LED4 |
| 4 | 330 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R3, R4 |
| 4 | 3,3k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R5, R6, R7, R8 |
| 4 | 220 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R9, R10, R11, R12 |
Robocar racer controller-2025 design files
The KiCad project lives in the PabloNunees/robocar-racer-controller-2025 repository on GitHub; these links point at the commit this page was built from.
- LayoutCar_v1.kicad_pcb
- SchematicCar_v1.kicad_sch
Robocar racer controller-2025: common questions
What microcontroller does the Robocar racer controller-2025 use?
The Robocar racer controller-2025 is built around the ESP 38 PINOS, from the ESP32 family.
How big is the Robocar racer controller-2025 PCB?
The Robocar racer controller-2025 measures 97 × 73.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Robocar racer controller-2025?
23 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Robocar racer controller-2025 design files?
From the PabloNunees/robocar-racer-controller-2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Robocar racer controller-2025 design in my own project?
Yes, under the terms of its MIT license, which PabloNunees chose for the repository.
Can I test firmware for the Robocar racer controller-2025 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k