Matrix mixer smt
padenot·eurorack·matrix-mixer smt/matrix-mixer-smt.kicad_pcb
About the Matrix mixer smt PCB
Matrix mixer smt is an open source PCB design by padenot, published on GitHub. It is a 2-layer board measuring 58.4 × 108 mm, with 84 components from 15 distinct parts.
Other key parts include the LM324N. By type, the board carries 32 resistors, 18 capacitors, 2 diodes, 1 IC and 1 connector.
It belongs with the audio designs in this gallery.
From the project
eurorack modules hardware design files and associated material
- .fpd : Front Panel Designer - .brd, .sch : Eagle - .svg : Inkscape
Main components on the Matrix mixer smt
Matrix mixer smt bill of materials (BOM)
84 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324N | SOIC-14_3.9x8.65mm_Pitch1.27mm | IC1 |
| 1 | EURO_HEADER_10pin | Header_2x05_Pitch2.54mm_TH_-12v_Label | J1 |
| 4 | SW_SPDT | Switch_Toggle_SPDT_SubMini | HPF_1, HPF_2, HPF_3, HPF_4 |
| 2 | TL074 | SOIC-14_3.9x8.65mm_Pitch1.27mm | I2, I3 |
| 5 | JACK-MONO | PJ301M-12 | INPUT_A1, OUT_1, OUT_2, OUT_3, OUT_4 |
| 3 | JACK_MONO | PJ301M-12 | INPUT_B1, INPUT_C1, INPUT_D1 |
| 16 | 50k | POT-9MM-ALPHA | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 +8 |
| 2 | 1N4007 | D_SOD-323 | D1, D2 |
| 2 | 4.7u | CP_Tantalum_EIA-6032-28_Kemet-C | C1, C2 |
| 16 | 100nf | C0603 | C3, C4, C5, C6, C7, C8, C9, C10 +8 |
| 16 | 100k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +8 |
| 4 | 2.44k | R_0603_1608Metric | R17, R19, R20, R21 |
| 4 | 16.6k | R_0603_1608Metric | R18, R22, R23, R24 |
| 4 | 5.89k | R_0603_1608Metric | R25, R27, R28, R29 |
| 4 | 6.89k | R_0603_1608Metric | R26, R30, R31, R32 |
Matrix mixer smt design files
The KiCad project lives in the padenot/eurorack repository on GitHub; these links point at the commit this page was built from.
Matrix mixer smt: common questions
How big is the Matrix mixer smt PCB?
The Matrix mixer smt measures 58.4 × 108 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Matrix mixer smt?
84 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Matrix mixer smt design files?
From the padenot/eurorack repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Matrix mixer smt design in my own project?
The repository has no license, so all rights stay with padenot. Use it as a reference, and ask the author before reusing the design.
More boards in eurorack
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687