15 open source boards using the LM324N
Real designs built with the LM324N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Matrix mixer smt
padenot
58.4 × 108 mm84 parts2LNo license1NXP
Bbesc
jakeread
110.5 × 82.6 mm79 parts2LNo license1CircuitProject
kimjy0508
100 × 100 mm136 parts2LNo license0Basicmother
cdrfiuba
125.7 × 121 mm81 parts2LNo license0EA801---Turma-C
Edson8101
175 × 90 mm39 parts2LMIT0Optical pulsation level indicator
vstoykovbg
53.1 × 75.9 mm34 parts2LNo license0Phase-Locked-Loop
SohithTondepu
51 × 54 mm15 parts2LNo license0Pll1-pcb project
dvmohith-66
51 × 54 mm15 parts2LNo license0FullInterlockingPlantCANPower
RobertPHeller
185.4 × 73.7 mm151 parts2LCC-BY-4.024DevilsTriangle
c-base
89.4 × 67.7 mm49 parts2LNo license2Matrix mixer
padenot
58.4 × 108 mm51 parts2LNo license1FullInterlockingPlantCAN
RobertPHeller
185.4 × 73.7 mm150 parts2LCC-BY-4.024Stereo mix
padenot
149.4 × 22.4 mm28 partsNo license1STM32
MC SunSensor
queens-satellite-team
90.2 × 95.9 mm104 parts4LNo license1QuadSMC
RobertPHeller
69.9 × 101.6 mm56 parts2LCC-BY-4.024
How designs wire the LM324N
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LM324N connects to, and the resistors, capacitors and other passives placed on it.
- The 2OUT pin has a series resistor on 9 of 11 designs, most often 100 kΩ (then 1 kΩ).
- The 1OUT pin has a series resistor on 8 of 11 designs, most often 1 kΩ (then 47 kΩ).
- The 2IN- pin has a series resistor on 8 of 11 designs, most often 100 kΩ (then 10 kΩ).
- The 3IN- pin has a series resistor on 8 of 11 designs, most often 100 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1OUTpin 1 | Connected to: Signal 91% |
|
| 1IN-pin 2 | Connected to: Signal 82% · VREF 18% |
|
| 1IN+pin 3 | Connected to: Signal 73% · GND 27% |
|
| VCCpin 4 | Connected to: 12V 100% | — |
| 2IN-pin 6 | Connected to: Signal 82% · not connected 18% |
|
| 2OUTpin 7 | Connected to: Signal 82% · not connected 18% |
|
| 3OUTpin 8 | Connected to: Signal 73% · not connected 27% |
|
| 3IN-pin 9 | Connected to: Signal 73% · not connected 27% |
|
| GNDpin 11 | Connected to: GND 82% | — |
| 4IN-pin 13 | Connected to: Signal 55% · not connected 36% |
|
| 4OUTpin 14 | Connected to: Signal 64% · not connected 36% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FullInterlockingPlantCAN by RobertPHeller, DevilsTriangle by c-base, Bbesc kiCad by jakeread and Matrix mixer by padenot.
The LM324N in open source designs
The gallery holds 15 open source boards using the LM324N from 11 GitHub repositories; a typical one measures about 90.2 × 82.6 mm and carries around 56 components.
93% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is FullInterlockingPlantCANPower by RobertPHeller.
Parts used alongside the LM324N
What boards using the LM324N are built for
LM324N: common questions
Where can I find a LM324N reference design?
Each of the 15 boards on this page is a real design using the LM324N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LM324N 2OUT pin?
The 2OUT pin has a series resistor on 9 of 11 designs, most often 100 kΩ (then 1 kΩ). Counted from the KiCad layouts of 11 open source designs using the LM324N.
What resistor goes on the LM324N 1OUT pin?
The 1OUT pin has a series resistor on 8 of 11 designs, most often 1 kΩ (then 47 kΩ). Counted from the KiCad layouts of 11 open source designs using the LM324N.
What resistor goes on the LM324N 2IN- pin?
The 2IN- pin has a series resistor on 8 of 11 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 11 open source designs using the LM324N.
What parts are used alongside the LM324N?
The CD74HCT74E, CD74HCT86E and NE555P appear in the most repositories here.
Which microcontrollers do boards using the LM324N use?
Most are built on NXP (1) and STM32 (1).
How big is a typical board using the LM324N?
The median is 90.2 × 82.6 mm, and 93% are two-layer designs.
What is the most popular open source board using the LM324N?
By GitHub stars, FullInterlockingPlantCANPower by RobertPHeller, with 24 stars.
Can I simulate one of these boards using the LM324N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.