Kicad aisch

pann·kicad-aisch·marklin-wifi-ctrl/esp32_c3.kicad_sch

This repository ships a schematic but no board layout.

About the Kicad aisch PCB

Kicad aisch is an open source ESP32 PCB design by pann, published on GitHub. It is a board, with 12 components from 6 distinct parts.

Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. By type, the board carries 7 capacitors, 2 switches, 2 resistors and 1 IC.

It belongs with the iot & wireless designs in this gallery.

From the project

Building a claude AI skill to better draw kicad schematics.

AI-assisted KiCad schematic generation — a Claude Code skill that generates production-ready KiCad 9 hierarchical schematics from a design description.

Given a hardware design description (e.g., "WiFi-controlled AC motor driver with ESP32"), the skill walks through a structured 7-phase workflow:

1. Requirements — parse and structure the design input 2. Architecture — MCU selection, system architecture, power domains 3. Block Design — decompose into schematic blocks with defined interfaces 4. Component Selection — select parts with LCSC part numbers 5. BOM — bill of materials with library…

Main components on the Kicad aisch

Kicad aisch bill of materials (BOM)

12 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-MINI-1-N4
U400
1
RESET
SW400
1
BOOT
SW401
2
10uF
C400, C401
5
100nF
C402, C403, C404, C405, C406
2
10K
R400, R401

Kicad aisch design files

The KiCad project lives in the pann/kicad-aisch repository on GitHub; these links point at the commit this page was built from.

Kicad aisch: common questions

What microcontroller does the Kicad aisch use?

The Kicad aisch is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.

How many components are on the Kicad aisch?

12 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kicad aisch design files?

From the pann/kicad-aisch repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Kicad aisch design in my own project?

The repository has no license, so all rights stay with pann. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kicad aisch without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards