HardLabs

Hackpad

PartialManiac3012·Hackpad·PCB FILES/Macropad.kicad_pcb

Hackpad PCB layout, top view — open source RP2040/RP2350 board by PartialManiac3012

About the Hackpad PCB

Hackpad is an open source RP2040/RP2350 PCB design by PartialManiac3012, published on GitHub. It is a 2-layer board measuring 65 × 70 mm, with 9 components from 4 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 7 switches, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Just a hackpad guys

3->> Fully Customizable { Modify The Code For Ur Own Functioning }

IDK WHY EVERYTHING IS SO EXPENSIVE IN INDIA

Total Estimated Cost: $22 WITH SHIPPING CHARGES INCLUDED I'm only asking for pcb cost as you guys said.

Hackpad, from the project README
From the project README

Main components on the Hackpad

XIAO-RP2040-DIP

Hackpad bill of materials (BOM)

9 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
CONN_01X04_PIN
Conn_01x04_Pin
J2
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
1
RotaryEncoder_Switch
SW7

Hackpad design files

The KiCad project lives in the PartialManiac3012/Hackpad repository on GitHub; these links point at the commit this page was built from.

Hackpad: common questions

What microcontroller does the Hackpad use?

The Hackpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Hackpad PCB?

The Hackpad measures 65 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hackpad?

9 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hackpad design files?

From the PartialManiac3012/Hackpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hackpad design in my own project?

The repository has no license, so all rights stay with PartialManiac3012. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hackpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards