Beatbox

parv20250-dot·Beatbox·PCB and schematic/Beatbox.kicad_pcb

Beatbox PCB layout, top view — open source board by parv20250-dot

About the Beatbox PCB

Beatbox is an open source PCB design by parv20250-dot, published on GitHub. It is a 2-layer board measuring 98 × 88.5 mm, with 29 components from 13 distinct parts.

Other key parts include the SN74AHCT125N and adafruit-MAX98357. By type, the board carries 8 connectors, 8 diodes, 8 resistors, 3 ICs, 1 speaker and 1 capacitor.

It belongs with the audio designs in this gallery.

From the project

I try making a drum pad that detects when it is hit and then plays corresponding sound and lights up the LED that is being hit.

(note: the colour can be selected/altered on the pcb manufacturer's app)

The drum pad detects when it is hit using Piezo discs which are basically small discs that can measure changes in pressure or vibration through the piezoelectric effect. When you strike the pad the force flexes the internal ceramic element inside the piezo disc creating an electrical signal. This is used to sense when it is hit and also the intensity of the hit through the vibrations caused on impact.

Beatbox, from the project README
From the project README

Main components on the Beatbox

Beatbox bill of materials (BOM)

29 components, 13 distinct parts.

QtyPartRefs
1
~
U1
1
SN74AHCT125N
U2
1
adafruit-MAX98357
U3
4
Conn_01x02_Pin
J1, J2, J3, J4
1
led1
J5
1
led2
J6
1
led3
J7
1
led4
J8
1
Speaker
LS1
8
D_Schottky
D1, D2, D3, D4, D5, D6, D7, D8
1
1000
C1
4
10k
R1, R4, R5, R7
4
1M
R2, R3, R6, R8

Beatbox design files

The KiCad project lives in the parv20250-dot/Beatbox repository on GitHub; these links point at the commit this page was built from.

Beatbox: common questions

How big is the Beatbox PCB?

The Beatbox measures 98 × 88.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Beatbox?

29 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Beatbox design files?

From the parv20250-dot/Beatbox repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Beatbox design in my own project?

The repository has no license, so all rights stay with parv20250-dot. Use it as a reference, and ask the author before reusing the design.

Similar boards