25 open source boards using the SN74AHCT125N
Real designs built with the SN74AHCT125N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
WLED PCB D1 Mini
f2daz
49.5 × 35.6 mm6 parts2LMIT34Openradfan
andrekuehne
65 × 70 mm43 parts2LMIT26ESP8266
WLED PCB V2
jhns-de
95 × 40 mm32 parts2LGPL-3.04NXP
VeloDashboard
JanBurp
131.5 × 119.5 mm58 parts2LNo license3Sr71-600
Telfair8632
74.6 × 94.6 mm41 parts2LMIT2AVR/Arduino
CPRPal
Will946
78.8 × 71.9 mm41 parts2LMIT1ESP8266
Ball Lamp
dipenarathod
80 × 80 mm33 parts2LNo license1ESP32
AOILED
aoishik
82.1 × 64 mm16 parts2LNo license1RP2040/RP2350
Omega-D
Sappling-Chores
338.5 × 122.5 mm262 parts2LCC-BY-NC-4.00NXP
Spectrum-Audio-Amp
anasarif23
178.8 × 171 mm242 parts4LNo license0RP2040/RP2350
Keyboard
georgempla
476.7 × 121.2 mm230 parts2LMIT0Shortkey
rudranshgoel1
234.1 × 102 mm147 parts2LNo license0SpinnyKittyCommittee
winsonlin8
120 × 97 mm80 parts2LMIT0ESP32
Car-Neopixel-Board
M0HID
41.7 × 50 mm33 parts2LNo license0Beatbox
parv20250-dot
98 × 88.5 mm29 parts2LNo license0ESP32
Arctic-Fox-Light
Cherrytree56567
32 × 38.5 mm17 parts2LNo license0RP2040/RP2350
LuminaBlossom
LunarEchoo56
61.5 × 59.5 mm7 parts2LApache-2.00- schematic only · 21 partsRP2040/RP2350
Anden dcc
laullon
21 partsMIT0 - schematic only · 20 partsESP32
Lisbon av install
squaretaper
20 partsNo license0 ESP32
ESP+Power Only
aaronluebbert
55.2 × 137.2 mm35 parts2LNo license1ESP8266
USBNightLightV1
dipenarathod
52.2 × 35.6 mm25 parts2LNo license1ESP32
Drone
Tomnwol
53.1 × 93.3 mm11 parts2LNo license1ESP8266
ESP12SmallNightLight
dipenarathod
75.7 × 37.7 mm23 parts2LNo license1NXP
TeensyOpenLoop
neurorishika
111.1 × 86 mm21 parts2LMIT0ESP8266
ThinUSBLightV1
dipenarathod
20 × 45 mm15 parts2LNo license1
How designs wire the SN74AHCT125N
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the SN74AHCT125N connects to, and the resistors, capacitors and other passives placed on it.
- The 1OE pin is tied to GND on 18 of 20 designs.
- The 4Y pin is left unconnected on 13 of 20 designs (a signal on 7).
- The 2OE pin is tied to GND on 12 of 20 designs (not connected on 4, 5V on 3).
- The 3Y pin is left unconnected on 12 of 20 designs (a signal on 8).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1OEpin 1 | Connected to: GND 90% | — |
| 1Ypin 3 | Connected to: A connector 25% |
|
| 2OEpin 4 | Connected to: GND 60% · not connected 20% · 5V 15% | — |
| GNDpin 7 | Connected to: GND 100% | — |
| 3Ypin 8 | Connected to: Not connected 60% · a signal 40% | — |
| 4Ypin 11 | Connected to: Not connected 65% · a signal 35% | — |
| VCCpin 14 | Connected to: 5V 95% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include WLED PCB D1 Mini by f2daz, Openradfan by andrekuehne, WLED PCB V2 by jhns-de and VeloDashboard by JanBurp.
The SN74AHCT125N in open source designs
The gallery holds 25 open source boards using the SN74AHCT125N from 22 GitHub repositories; a typical one measures about 78.8 × 80 mm and carries around 32 components.
96% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is WLED PCB D1 Mini by f2daz.
Parts used alongside the SN74AHCT125N
Microcontrollers on boards using the SN74AHCT125N
What boards using the SN74AHCT125N are built for
SN74AHCT125N: common questions
Where can I find a SN74AHCT125N reference design?
Each of the 25 boards on this page is a real design using the SN74AHCT125N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74AHCT125N 1OE pin connected?
The 1OE pin is tied to GND on 18 of 20 designs. Counted from the KiCad layouts of 20 open source designs using the SN74AHCT125N.
How is the SN74AHCT125N 4Y pin connected?
The 4Y pin is left unconnected on 13 of 20 designs (a signal on 7). Counted from the KiCad layouts of 20 open source designs using the SN74AHCT125N.
How is the SN74AHCT125N 2OE pin connected?
The 2OE pin is tied to GND on 12 of 20 designs (not connected on 4, 5V on 3). Counted from the KiCad layouts of 20 open source designs using the SN74AHCT125N.
What parts are used alongside the SN74AHCT125N?
The LM2596S-5, AMS1117-3.3, ESP32-DEVKIT-V1, RaspberryPi_Pico and Teensy4.1 appear in the most repositories here.
Which microcontrollers do boards using the SN74AHCT125N use?
Most are built on ESP32 (6), ESP8266 (6), RP2040/RP2350 (4) and NXP (3).
How big is a typical board using the SN74AHCT125N?
The median is 78.8 × 80 mm, and 96% are two-layer designs.
What is the most popular open source board using the SN74AHCT125N?
By GitHub stars, WLED PCB D1 Mini by f2daz, with 34 stars.
Can I simulate one of these boards using the SN74AHCT125N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.