HardLabs

EasyDev

parya7254·EasyDev·PCB/EasyDev.kicad_pcb

EasyDev PCB layout, top view — open source RP2040/RP2350 board by parya7254

About the EasyDev PCB

EasyDev is an open source RP2040/RP2350 PCB design by parya7254, published on GitHub. It is a 2-layer board measuring 21 × 51 mm, with 35 components from 18 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the NCP1117-3.3_SOT223 and W25Q128JVS. By type, the board carries 17 capacitors, 7 resistors, 5 connectors, 3 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A RP2040 Dev Board featuring 43 exposed pins along with 16 MB of flash storage! Can support up to (not recommended) 1A of power draw on VBUS!

EasyDev, from the project README
From the project README

Main components on the EasyDev

RP2040NCP1117-3.3_SOT223W25Q128JVS

EasyDev bill of materials (BOM)

35 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
NCP1117-3.3_SOT223
U2
1
W25Q128JVS
U3
1
12 MHz
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
2
Conn_01x20
J2, J3
1
Conn_01x03
J4
1
Conn_01x01
J5
1
SW_Push
SW1
1
WS2812B-2020
D1
2
1uF
C1, C10
11
0.1uF
C2, C3, C4, C5, C6, C7, C8, C9 +3
2
10uF
C13, C14
2
33pF
C15, C16
2
5.1K
R1, R2
2
27
R3, R4
2
1K
R5, R6
1
10K
R7

EasyDev design files

The KiCad project lives in the parya7254/EasyDev repository on GitHub; these links point at the commit this page was built from.

EasyDev: common questions

What microcontroller does the EasyDev use?

The EasyDev is built around the RP2040, from the RP2040/RP2350 family.

How big is the EasyDev PCB?

The EasyDev measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EasyDev?

35 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EasyDev design files?

From the parya7254/EasyDev repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EasyDev design in my own project?

The repository has no license, so all rights stay with parya7254. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the EasyDev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in EasyDev

Similar boards