HardLabs

Easypad-V2

parya7254·Easypad-V2·PCB/Easypad-V2.kicad_pcb

Easypad-V2 PCB layout, top view — open source RP2040/RP2350 board by parya7254

About the Easypad-V2 PCB

Easypad-V2 is an open source RP2040/RP2350 PCB design by parya7254, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 51 components from 6 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 33 diodes, 16 switches, 1 module and 1 connector.

It belongs with the displays & leds and keyboards designs in this gallery.

From the project

A compact macropad featuring RGB lighting with SK6812 MINI-E Neopixel LEDs, a rotary encoder, a SSD1306 OLED Display and 15 (low-profile) choc mechanical switches! Powered by KMK firmware!

Easypad-V2, from the project README
From the project README

Main components on the Easypad-V2

RaspberryPi_Pico

Easypad-V2 bill of materials (BOM)

51 components, 6 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
Conn_01x04_Pin
J1
15
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +7
1
RotaryEncoder_Switch
SW16
17
SK6812MINI-E
D1, D2, D3, D4, D5, D6, D7, D8 +9
16
1N4148W
D10, D11, D12, D13, D14, D15, D16, D17 +8

Easypad-V2 design files

The KiCad project lives in the parya7254/Easypad-V2 repository on GitHub; these links point at the commit this page was built from.

Easypad-V2: common questions

What microcontroller does the Easypad-V2 use?

The Easypad-V2 is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Easypad-V2 PCB?

The Easypad-V2 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Easypad-V2?

51 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Easypad-V2 design files?

From the parya7254/Easypad-V2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Easypad-V2 design in my own project?

The repository has no license, so all rights stay with parya7254. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Easypad-V2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards