Patrick-Richter-Microcontroladores-2025-C1
About the Patrick-Richter-Microcontroladores-2025-C1 PCB
Patrick-Richter-Microcontroladores-2025-C1 is an open source ESP32 PCB design by patrickRJ20212304, published on GitHub. It is a 2-layer board measuring 50.8 × 68.6 mm, with 28 components from 16 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the LM7805CT. By type, the board carries 5 resistors, 3 diodes, 3 capacitors, 2 ICs, 2 transistors and 2 relays.
Main components on the Patrick-Richter-Microcontroladores-2025-C1
Patrick-Richter-Microcontroladores-2025-C1 bill of materials (BOM)
28 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32D | ESP32-C3-DevKitM-1 | U1 |
| 1 | LM7805CT | TO-220-3_Vertical | U2 |
| 2 | 2N2219 | SOT-23 | Q1, Q2 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_KingTek_DSHP04TS_W7.62mm_P1.27mm | DIP_SWITCH1 |
| 3 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | FOTO_CELDA1, LLAVE1, SWITCH_ANALOGO1 |
| 2 | SANYOU_SRD_Form_C | Relay_SPDT_SANYOU_SRD_Series_Form_C | K3, K4 |
| 1 | - | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | MOTOR1 |
| 2 | PC817 | DIP-4_W7.62mm_SMDSocket_SmallPads | OC1, OC2 |
| 1 | SW_Push | SW_Push_1P1T_NO_CK_KSC7xxJ | SW1 |
| 1 | 12V | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | V_ENTRADA1 |
| 2 | LED_0603_Red | LED_D5.0mm | LED1, LED2 |
| 2 | 1N914BWS ON Semiconductor / Fairchild | D_0201_0603Metric_TVS | D1, D2 |
| 1 | ESD9B3.3 | D_SOD-923_TVS | D3 |
| 3 | 0603YC104KAT2A 100nF_0603_16V AVX Corporation | C_0603 | C2, C3, C4 |
| 3 | RC0603FR-0722KL 22k_0603 Yageo | R_0603 | R1, R2, R3 |
| 2 | 2k | R_0603_1608Metric | R4, R5 |
Patrick-Richter-Microcontroladores-2025-C1 design files
The KiCad project lives in the patrickRJ20212304/Patrick-Richter-Microcontroladores-2025-C1 repository on GitHub; these links point at the commit this page was built from.
- LayoutPLACA/PLACA.kicad_pcb
- SchematicPLACA/PLACA.kicad_sch
Patrick-Richter-Microcontroladores-2025-C1: common questions
What microcontroller does the Patrick-Richter-Microcontroladores-2025-C1 use?
The Patrick-Richter-Microcontroladores-2025-C1 is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the Patrick-Richter-Microcontroladores-2025-C1 PCB?
The Patrick-Richter-Microcontroladores-2025-C1 measures 50.8 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Patrick-Richter-Microcontroladores-2025-C1?
28 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Patrick-Richter-Microcontroladores-2025-C1 design files?
From the patrickRJ20212304/Patrick-Richter-Microcontroladores-2025-C1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Patrick-Richter-Microcontroladores-2025-C1 design in my own project?
The repository has no license, so all rights stay with patrickRJ20212304. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Patrick-Richter-Microcontroladores-2025-C1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k