Kicad for mere mortals
paulsullivan33-dev·kicad-for-mere-mortals·kicad-lab/blinker/blinker.kicad_pcb
About the Kicad for mere mortals PCB
Kicad for mere mortals is an open source PCB design by paulsullivan33-dev, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 55 × 40 mm, with 8 components from 7 distinct parts.
Other key parts include the NE555P. By type, the board carries 3 resistors, 2 capacitors, 1 IC, 1 connector and 1 diode.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
Design a circuit board from schematic to fabrication files, in plain language - KiCad for Mere Mortals
Somewhere between the blinking LED on a breadboard and a parcel from a fabrication house sits a skill that looks harder than it is: drawing the board properly. KiCad is the open-source suite that does the whole job — schematic, board layout, the checkers that keep both honest, and the manufacturing files a fab needs — and it is what working engineers reach for when the board is real. This guide teaches that workflow the plain way, on one small board you design end to end: a 555 timer that blinks an LED, from an empty project to a set of Gerber files you could send away today.
Main components on the Kicad for mere mortals
Kicad for mere mortals bill of materials (BOM)
8 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | Conn_01x02_Pin | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 47uF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 10nF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Kicad for mere mortals design files
The KiCad project lives in the paulsullivan33-dev/kicad-for-mere-mortals repository on GitHub; these links point at the commit this page was built from.
Kicad for mere mortals: common questions
How big is the Kicad for mere mortals PCB?
The Kicad for mere mortals measures 55 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad for mere mortals?
8 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad for mere mortals design files?
From the paulsullivan33-dev/kicad-for-mere-mortals repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad for mere mortals design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which paulsullivan33-dev chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k