Patterngen

pavels·patterngen·patterngen-hw/patterngen-hw.kicad_pcb

Patterngen PCB layout, top view — open source RP2040/RP2350 board by pavels

About the Patterngen PCB

Patterngen is an open source RP2040/RP2350 PCB design by pavels, published on GitHub under the BSD-2-Clause license. It is a 4-layer board measuring 45 × 76 mm, with 51 components from 29 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the ADV7391BCPZ, ADA4432-1BRJZ-R7, AMS1117-3.3, ME6211C18M5 and W25Q128JVS. By type, the board carries 24 capacitors, 13 resistors, 6 ICs, 2 crystals, 2 switches and 2 inductors.

It belongs with the audio designs in this gallery.

From the project

Composite video test pattern generator

Composite video test pattern generator: RP2040 + ADV7391 encoder, PAL and NTSC. It replays the patterns of two classic Philips generators from their original ROM dumps:

- PM5644 Colour Circle (PAL-G and NTSC) - PM5631 multi-pattern generator, all 98 patterns (PAL-G and NTSC)

plus computed test signals named SYNTH ...: multiburst, and an edges demo showing hard and band-limited luma steps, pulses and colour bars side by side.

Main components on the Patterngen

ADV7391BCPZADA4432-1BRJZ-R7AMS1117-3.3ME6211C18M5W25Q128JVSRP2040

Patterngen bill of materials (BOM)

51 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADV7391BCPZ
U1
1
ADA4432-1BRJZ-R7
U2
1
AMS1117-3.3
U3
1
ME6211C18M5
U5
1
W25Q128JVS
U6
1
RP2040
U7
1
ABM8-272-T3
Y1
1
XO32
Y2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J3
2
SW_Push
SW3, SW4
1
LED
D3
2
C1002
FerriteBead_Small
FB1, FB2
5
1UF
1uF
C1, C10, C18, C26, C27
2
15P
15p
C2, C3
10
100NF
100nF
C4, C5, C9, C11, C13, C16, C19, C21 +2
2
10UF
10uF
C6, C7
1
2.2NF
2.2nF
C8
2
10NF
10nF
C17, C20
1
12NF
12nF
C22
1
150NF
150nF
C23
Show 9 more
QtyPartRefs
2
1k
R1, R5
2
5K1
5k1
R2, R3
1
470R
R4
2
22R
R6, R7
1
75R
R8
1
300R
R9
1
4K12
4k12
R10
1
169R
R11
2
4K7
4k7
R12, R13

Patterngen design files

The KiCad project lives in the pavels/patterngen repository on GitHub; these links point at the commit this page was built from.

Patterngen: common questions

What microcontroller does the Patterngen use?

The Patterngen is built around the RP2040, from the RP2040/RP2350 family.

How big is the Patterngen PCB?

The Patterngen measures 45 × 76 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Patterngen?

51 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Patterngen design files?

From the pavels/patterngen repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Patterngen design in my own project?

Yes, under the terms of its BSD-2-Clause license, which pavels chose for the repository.

Can I test firmware for the Patterngen without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards