Thin-Pod-Gateway rev-0.1
Pealie·Thin-Pod-Gateway-rev-0.1·hardware/source/kicad/rev0.1/Thin-Pod Gateway.kicad_pcb
About the Thin-Pod-Gateway rev-0.1 PCB
Thin-Pod-Gateway rev-0.1 is an open source ESP32 PCB design by Pealie, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 160 × 145 mm, with 22 components from 19 distinct parts.
Its main chip is the XIAO-ESP32-C6-DIP, from the ESP32 family. Other key parts include the DWM3001CDK. By type, the board carries 13 test points, 5 capacitors, 2 ICs and 2 resistors.
From the project
This directory contains the preferred modifiable source for Thin-Pod Gateway rev 0.1.
This directory contains the preferred modifiable source for Thin-Pod Gateway rev 0.1.
The schematic and PCB title blocks identify the design revision as 0.1. The KiCad project and PCB fabrication-output paths use the repository-relative location:
This removes the private Windows/OneDrive path that was present in the working project before publication. No schematic connectivity, component placement, routing or board geometry was intentionally changed by that portability correction.
Main components on the Thin-Pod-Gateway rev-0.1
Thin-Pod-Gateway rev-0.1 bill of materials (BOM)
22 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DWM3001CDK Qorvo | MODULE_DWM3001CDK | U2 |
| 1 | XIAO-ESP32-C6-DIP Seeed Studio | XIAO-ESP32-C6-DIP | U3 |
| 1 | GND_DWM N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1 |
| 1 | 5V_GATEWAY N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP2 |
| 1 | GND_C6 N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP3 |
| 1 | 3V3_GATEWAY N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP4 |
| 1 | DWM_RESET N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP5 |
| 1 | DWM_IRQ N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP6 |
| 1 | DWM_CS N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP7 |
| 1 | C6_CS N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP8 |
| 1 | C6_INT N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP9 |
| 1 | SPI5_SCK N/A / optional generic hardware | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP10 |
| 1 | SPI5_MOSI N/A / optional generic hardware | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP11 |
| 1 | SPI5_MISO N/A / optional generic hardware | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP12 |
| 1 | 5V_NUCLEO N/A / optional generic hardware | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP13 |
| 2 | 100nF Generic | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C3 |
| 2 | 10uF Generic | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C4 |
| 1 | 22uF Generic | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 2 | 10K Generic | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
Thin-Pod-Gateway rev-0.1 design files
The KiCad project lives in the Pealie/Thin-Pod-Gateway-rev-0.1 repository on GitHub; these links point at the commit this page was built from.
Thin-Pod-Gateway rev-0.1: common questions
What microcontroller does the Thin-Pod-Gateway rev-0.1 use?
The Thin-Pod-Gateway rev-0.1 is built around the XIAO-ESP32-C6-DIP, from the ESP32 family.
How big is the Thin-Pod-Gateway rev-0.1 PCB?
The Thin-Pod-Gateway rev-0.1 measures 160 × 145 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Thin-Pod-Gateway rev-0.1?
22 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Thin-Pod-Gateway rev-0.1 design files?
From the Pealie/Thin-Pod-Gateway-rev-0.1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Thin-Pod-Gateway rev-0.1 design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which Pealie chose for the repository.
Can I test firmware for the Thin-Pod-Gateway rev-0.1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k