30 open source boards using the XIAO-ESP32-C6-DIP

Real designs built with the XIAO-ESP32-C6-DIP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

30 boardsClear filters|Most starred

How designs wire the XIAO-ESP32-C6-DIP

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the XIAO-ESP32-C6-DIP connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3_12 pin is tied to 3.3V on 11 of 13 designs.
3V3_12pin 12Connected to: 3.3V 85%
GND_13pin 13Connected to: GND 100%
VBUS_14pin 14Connected to: 5V 100%

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HOPPVALS-MRF-01 by evanpurkhiser, Videocraft PetPad by Videocraft10, Blobfi by Anvarys and CybdoClock by Cybdo.

The XIAO-ESP32-C6-DIP in open source designs

The gallery holds 30 open source boards using the XIAO-ESP32-C6-DIP from 29 GitHub repositories; a typical one measures about 203.1 × 125.1 mm and carries around 21 components.

100% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.

The most starred is XIAO by Josephrp.

Microcontrollers on boards using the XIAO-ESP32-C6-DIP

XIAO-ESP32-C6-DIP: common questions

Where can I find a XIAO-ESP32-C6-DIP reference design?

Each of the 30 boards on this page is a real design using the XIAO-ESP32-C6-DIP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the XIAO-ESP32-C6-DIP 3V3_12 pin connected?

The 3V3_12 pin is tied to 3.3V on 11 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the XIAO-ESP32-C6-DIP.

What parts are used alongside the XIAO-ESP32-C6-DIP?

The XIAO-ESP32-C3-DIP, XIAO-ESP32-C3-SMD, XIAO-ESP32-C5-SMD, XIAO-ESP32-C6-SMD and XIAO-ESP32-S3-DIP appear in the most repositories here.

Which microcontrollers do boards using the XIAO-ESP32-C6-DIP use?

Most are built on ESP32 (15), RP2040/RP2350 (14) and Nordic nRF (1).

How big is a typical board using the XIAO-ESP32-C6-DIP?

The median is 203.1 × 125.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the XIAO-ESP32-C6-DIP?

By GitHub stars, XIAO by Josephrp, with 12 stars.

Can I simulate one of these boards using the XIAO-ESP32-C6-DIP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part