ABIISS Datapod module

pedrolpena·datapod·schematics/datapod/datapod.kicad_pcb

ABIISS Datapod module layout, top view — open source AVR/Arduino board by pedrolpena

About the ABIISS Datapod module

ABIISS Datapod module is an open source AVR/Arduino PCB design by pedrolpena, published on GitHub. It is a 2-layer board measuring 149.3 × 152.5 mm, with 57 components from 41 distinct parts.

Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. Other key parts include the 296-14619-1, 296-1222-1, LT8609EMSETRPBF, LT1374CS8-5PBF and DS3231M. By type, the board carries 21 capacitors, 7 connectors, 7 resistors, 6 ICs, 6 diodes and 5 transistors.

From the project

Arduino based schematics and software for the AOML ABIIS system

Main components on the ABIISS Datapod module

ABIISS Datapod module bill of materials (BOM)

57 components, 41 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328P-PU
ATmega328P-PU
U1
1
296-14619-1
MAX232
Digikey
U2
1
296-1222-1
74LVC125
Digikey
U3
1
LT8609EMSETRPBF
U4
1
LT1374CS8-5PBF
U5
1
DS3231M
Digikey
U6
4
FDG1024NZFS
FDG1024NZ
Digikey
Q1, Q2, Q4, Q5
1
IRF7324PBF
IRF7324
Digikey
Q3
1
SER3686
16Mhz
Digikey
Y1
1
WM3900
Conn_01x02
Digikey
J1
1
WM11971
Conn_02x03_Odd_Even
Digikey
J2
1
WM11969
Conn_01x02
Digikey
J3
1
732-3820-1
Micro_SD_Card
Digikey
J6
1
WM15036
Conn_02x02_Odd_Even
Digikey
J7
1
36-1058
Conn_01x02_Female
Digikey
J8
1
1175-1864
Conn_02x03_Odd_Even
Digikey
J9
2
ED11086
DS2E-SL2-DC5V
Digikey
K1, K2
4
B220A-FDI
B220A-13-F
Digikey
D1, D2, D3, D4
1
1514-CMDSH-3TRPBFREE
CMDSH-3
Digikey
D5
1
MBRS340FS
MBRS340
Digikey
D6
Show 21 more
QtyPartRefs
1
587-2771-1
2.2uH
Digikey
L1
1
SRP6540-100M
10uH
Digikey
L2
2
399-8165-1
22pF
Digikey
C1, C2
5
TCJP105M025R0500
1uF
Digikey
C3, C4, C5, C6, C7
1
490-12753-1
4.7uF
Digikey
C8
2
478-3351-1
.1uF
Digikey
C9, C19
1
311-1136-1
10nF
Digikey
C10
1
399-7062-1
10pF
Digikey
C11
1
311-1365-1
1uF
Digikey
C12
1
1276-6780-1
22uF
Digikey
C13
1
478-1561-1
.27uF
Digikey
C14
1
718-1890-1
100uF
Digikey
C15
1
478-10560-1
5000pF
Digikey
C16
2
TCJA106M025R0150
10uF
Digikey
C17, C18
2
6.3v 3300uF
C20, C21
1
311-100KCR
100k, 1%
Digikey
R1
1
311-18.2KCR
18.2k, 1%
Digikey
R2
1
311-1.00MCR
1M, 1%
Digikey
R3
1
311-309KCR
309k, 1%
Digikey
R4
1
749-1125-6
10K
Digikey
R5
2
OSOPT-10KA
R_Pack 10k Ohms
Digikey
RN1, RN3

ABIISS Datapod module design files

The KiCad project lives in the pedrolpena/datapod repository on GitHub; these links point at the commit this page was built from.

ABIISS Datapod module: common questions

What microcontroller does the ABIISS Datapod module use?

The ABIISS Datapod module is built around the ATMEGA328P-PU, from the AVR/Arduino family.

How big is the ABIISS Datapod module?

The ABIISS Datapod module measures 149.3 × 152.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ABIISS Datapod module?

57 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ABIISS Datapod module design files?

From the pedrolpena/datapod repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ABIISS Datapod module design in my own project?

The repository has no license, so all rights stay with pedrolpena. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ABIISS Datapod module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in datapod

Similar boards