Datapod Battery Board
About the Datapod Battery Board
Datapod Battery Board is an open source PCB design by pedrolpena, published on GitHub. It is a 2-layer board measuring 292.1 × 292.1 mm, with 56 components from 14 distinct parts.
By type, the board carries 50 connectors and 6 diodes.
It belongs with the power & battery designs in this gallery.
From the project
Arduino based schematics and software for the AOML ABIIS system
Datapod Battery Board bill of materials (BOM)
56 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WM3900 Conn_01x02 Digikey | Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J1 |
| 1 | WM11971 Screw_Terminal_01x01 Digikey | screw_terminal_7.0mmx5.0mm | J2 |
| 1 | WM11969 Screw_Terminal_01x01 Digikey | screw_terminal_7.0mmx5.0mm | J3 |
| 1 | AE10921 Screw_Terminal_01x01 Digikey | screw_terminal_7.0mmx5.0mm | J4 |
| 1 | AE10968 Screw_Terminal_01x01 Digikey | screw_terminal_7.0mmx5.0mm | J5 |
| 1 | 732-3820-1 Screw_Terminal_01x01 Digikey | screw_terminal_7.0mmx5.0mm | J6 |
| 1 | WM15036 Screw_Terminal_01x01 Digikey | screw_terminal_7.0mmx5.0mm | J7 |
| 1 | 36-1058 Screw_Terminal_01x01 Digikey | screw_terminal_7.0mmx5.0mm | J8 |
| 1 | 1175-1864 Screw_Terminal_01x01 Digikey | screw_terminal_7.0mmx5.0mm | J9 |
| 40 | Screw_Terminal_01x01 | screw_terminal_7.0mmx5.0mm | J10, J11, J12, J13, J14, J15, J16, J17 +32 |
| 1 | Conn_01x02 | Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J34 |
| 4 | B220A-FDI 1N5818 Digikey | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 1 | 1514-CMDSH-3TRPBFREE 1N5818 Digikey | D_DO-41_SOD81_P10.16mm_Horizontal | D5 |
| 1 | MBRS340FS 1N5818 Digikey | D_DO-41_SOD81_P10.16mm_Horizontal | D6 |
Datapod Battery Board design files
The KiCad project lives in the pedrolpena/datapod repository on GitHub; these links point at the commit this page was built from.
Datapod Battery Board: common questions
How big is the Datapod Battery Board?
The Datapod Battery Board measures 292.1 × 292.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Datapod Battery Board?
56 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Datapod Battery Board design files?
From the pedrolpena/datapod repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Datapod Battery Board design in my own project?
The repository has no license, so all rights stay with pedrolpena. Use it as a reference, and ask the author before reusing the design.
More boards in datapod
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k