BMS
Pegoku·BMS-PCB·bms-pcb/bms-pcb.kicad_pcb
About the BMS PCB
BMS is an open source PCB design by Pegoku, published on GitHub. It is a 2-layer board measuring 75 × 40.5 mm, with 35 components from 15 distinct parts.
Other key parts include the BQ7791500PWR and IRFR3707ZTRPBF-VB. By type, the board carries 17 resistors, 9 ICs, 7 capacitors, 1 connector and 1 test point.
It belongs with the power & battery designs in this gallery.
Main components on the BMS
BMS bill of materials (BOM)
35 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ7791500PWR | TSSOP-24_L7.8-W4.4-P0.65-LS6.4-BL | U1 |
| 8 | IRFR3707ZTRPBF-VB | TO-252-3_L6.5-W6.1-P4.58-LS9.9-BR | U2, U3, U4, U5, U6, U7, U8, U9 |
| 1 | CONN_01X05 Conn_01x05 | JST_XH_S5B-XH-A-1_1x05_P2.50mm_Horizontal | J1 |
| 1 | TestPoint | TestPoint | TP2 |
| 2 | 1UF 1uF | C_0805_2012Metric | C1, C7 |
| 5 | 0.1UF 0.1uF | C_0805_2012Metric | C2, C3, C4, C5, C6 |
| 1 | R | R_0805_2012Metric | R1 |
| 3 | 10K 10k | R_0805_2012Metric | R2, R11, R16 |
| 1 | 470K 470k | R_0805_2012Metric | R3 |
| 1 | 100K 100k | R_0805_2012Metric | R4 |
| 5 | 1k | R_2512_6332Metric | R5, R6, R7, R8, R9 |
| 2 | 1k | R_0805_2012Metric | R10, R12 |
| 1 | 4.5K 4.5k | R_0805_2012Metric | R13 |
| 2 | 1M | R_0805_2012Metric | R14, R15 |
| 1 | C13879 MF52A1103F3950(P334-4) | RES-TH_L2.5-W2.5-P1.70-D0.3 | R17 |
BMS design files
The KiCad project lives in the Pegoku/BMS-PCB repository on GitHub; these links point at the commit this page was built from.
BMS: common questions
How big is the BMS PCB?
The BMS measures 75 × 40.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BMS?
35 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BMS design files?
From the Pegoku/BMS-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BMS design in my own project?
The repository has no license, so all rights stay with Pegoku. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k