6 open source boards using the BQ7791500PWR

Real designs built with the BQ7791500PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the BQ7791500PWR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BQ7791500PWR connects to, and the resistors, capacitors and other passives placed on it.

  • The VC4_4 pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The VC3_5 pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The VC2_6 pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The VC1_7 pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
VDD_1pin 1Connected to: Signal 80% · VDD 20%
  • Series resistor on 60% · 1 kΩ (3), 10 kΩ (2)
  • Series capacitor on 40% · 1 µF (1), 100 nF (1)
  • Capacitor to GND on 40% · 1 µF (2)
AVDD_2pin 2Connected to: Signal 80% · AVDD 20%
  • Series capacitor on 40% · 1 µF (1), 100 nF (1)
  • Capacitor to GND on 40% · 1 µF (2)
VC5_3pin 3Connected to: Signal 80% · GND 20%
  • Series resistor on 80% · 1 kΩ (3), 75 Ω (1)
  • Series capacitor on 80% · 100 nF (3), 1 µF (1)
VC4_4pin 4Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (4), 1 µF (1)
  • Series resistor on 80% · 1 kΩ (3), 75 Ω (1)
VC3_5pin 5Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5), 1 µF (2)
  • Series resistor on 80% · 1 kΩ (3), 75 Ω (1)
VC2_6pin 6Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (7), 1 µF (2)
  • Series resistor on 80% · 1 kΩ (3), 75 Ω (1)
VC1_7pin 7Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (6), 1 µF (2)
  • Series resistor on 80% · 1 kΩ (3), 75 Ω (1)
VC0_8pin 8Connected to: Signal 80% · GND 20%
  • Series capacitor on 60% · 100 nF (2), 1 µF (1)
  • Series resistor on 60% · 1 kΩ (2), 75 Ω (1)
  • Capacitor to GND on 40% · 100 nF (2)
VSS_9pin 9Connected to: A connector 40% · GND 40%
  • Series capacitor on 60% · 100 nF (5), 1 µF (3), 4.7 µF (1)
  • Series resistor on 40% · 100 Ω (1), 16.5 kΩ (1), 75 Ω (1)
SRP_10pin 10Connected to: A connector 40% · GND 20%
  • Series capacitor on 80% · 100 nF (6), 1 µF (3), 4.7 µF (1)
  • Series resistor on 40% · 100 Ω (1), 16.5 kΩ (1), 75 Ω (1)
SRN_11pin 11Connected to: Signal 100%
  • Series resistor on 100% · 100 Ω (2), 1 MΩ (2), 75 Ω (1)
  • Series capacitor on 50% · 100 nF (3), 1 µF (2)
DSG_12pin 12Connected to: Signal 75% · not connected 25%
  • Series resistor on 75% · 4.5 kΩ (2), 1 kΩ (1)
CHG_13pin 13Connected to: Signal 75% · not connected 25%
  • Series resistor on 75% · 1 kΩ (3)
LD_14pin 14Connected to: Signal 100%
  • Resistor to GND on 50% · 470 kΩ (1), 450 kΩ (1)
  • Series resistor on 50% · 453 kΩ (1), 470 kΩ (1)
LPWR_15pin 15Connected to: Not connected 100%
CBI_16pin 16Connected to: Signal 75% · GND 25%
  • Series resistor on 50% · 0 Ω (1), 453 kΩ (1), 10 kΩ (1)
OCDP_17pin 17Connected to: Signal 75% · not connected 25%
  • Resistor to GND on 50% · 196 kΩ (1), 100 kΩ (1)
TS_18pin 18Connected to: Signal 100%
  • Series resistor on 100% · 10 kΩ (5)
  • Resistor to GND on 50% · 10 kΩ (1)
VTB_19pin 19Connected to: Signal 75% · not connected 25%
  • Series resistor on 75% · 10 kΩ (3)
CBO_21pin 21Connected to: Not connected 100%
PRES_22pin 22Connected to: Signal 100%
  • Series resistor on 100% · 10 kΩ (2), 220 kΩ (1), 1 kΩ (1)
CTRC_23pin 23Connected to: GND 75% · a signal 25%
CTRD_24pin 24Connected to: GND 75% · a signal 25%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ducker-Charger by Angelussss, Power board by tudsat-rocket, Primer Carrier for LattePanda Mu by Astrid-Delestine and Flight Controller by C-yue28.

The BQ7791500PWR in open source designs

The gallery holds 6 open source boards using the BQ7791500PWR from 5 GitHub repositories; a typical one measures about 90 × 98.5 mm and carries around 183 components.

83% use four copper layers or more, and 33% carry an open source license.

The most starred is Ducker-Charger by Angelussss.

Parts used alongside the BQ7791500PWR

Microcontrollers on boards using the BQ7791500PWR

What boards using the BQ7791500PWR are built for

BQ7791500PWR: common questions

Where can I find a BQ7791500PWR reference design?

Each of the 6 boards on this page is a real design using the BQ7791500PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the BQ7791500PWR VC4_4 pin connected?

The VC4_4 pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the BQ7791500PWR.

How is the BQ7791500PWR VC3_5 pin connected?

The VC3_5 pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the BQ7791500PWR.

How is the BQ7791500PWR VC2_6 pin connected?

The VC2_6 pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the BQ7791500PWR.

Which microcontrollers do boards using the BQ7791500PWR use?

Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the BQ7791500PWR?

The median is 90 × 98.5 mm, and 17% are two-layer designs.

What is the most popular open source board using the BQ7791500PWR?

By GitHub stars, Ducker-Charger by Angelussss, with 18 stars.

Can I simulate one of these boards using the BQ7791500PWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part