Usage
pete529·PICO_Drone_Mk1·hardware/modules/atopile/bosch-bmp280/layouts/usage/usage.kicad_pcb
About the Usage PCB
Usage is an open source RP2040/RP2350 PCB design by pete529, published on GitHub under the MIT license. It is a 2-layer board measuring 4.1 × 3.1 mm, with 6 components from 3 distinct parts.
Its main chip is the BMP280, from the RP2040/RP2350 family. By type, the board carries 3 resistors, 2 capacitors and 1 IC.
It belongs with the sensors and robotics & motion designs in this gallery.
From the project
Raspberry Pi Pico 2W mini Drone Project
The BMP280 is a digital temperature and pressure sensor featuring high accuracy and low power consumption. It is based on Bosch's proven piezo-resistive pressure sensor technology with an accuracy down to 0.12 hPa, ultra-low power consumption, and a robust design.
- Pressure measurement: 300-1100 hPa (±1 hPa accuracy) - Temperature measurement: -40°C to +85°C (±1°C accuracy) - Low power consumption: 2.7 µA @ 1 Hz sampling - High resolution: Up to 0.16 Pa (13 cm) altitude resolution - Dual interface: I²C and SPI communication - Wide supply voltage: 1.71V to 3.6V (VDD), 1.2V to 3.6V (VDDIO) -…
Main components on the Usage
Usage bill of materials (BOM)
6 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMP280 Raspberry Pi Pico 2 W module Bosch Sensortec | LGA-8_L2.5-W2.0-P0.65_AMP6127 | U1 |
| 2 | CL05B104KO5NNNC 100nF ±10% 16V X7R Samsung Electro-Mechanics | C0402 | C1, C2 |
| 3 | 0402WGF1002TCE 10kΩ ±1% 62.5mW UNI-ROYAL(Uniroyal Elec) | R0402 | R1, R2, R3 |
Usage design files
The KiCad project lives in the pete529/PICO_Drone_Mk1 repository on GitHub; these links point at the commit this page was built from.
Usage: common questions
What microcontroller does the Usage use?
The Usage is built around the BMP280, from the RP2040/RP2350 family.
How big is the Usage PCB?
The Usage measures 4.1 × 3.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usage?
6 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usage design files?
From the pete529/PICO_Drone_Mk1 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Usage design in my own project?
Yes, under the terms of its MIT license, which pete529 chose for the repository.
Can I test firmware for the Usage without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in PICO_Drone_Mk1
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k